Beko CG 41010 G - Инструкция (Страница 37)

Pari 6:
Aioffffenofffce and cfeaning
Turn off the mains switsh
before sleaning
^ Before switching on again ensure
that all controls are in the OFF position.
^ Moke sure that the oven, grill before
you start cleaning.
^ Your product is manufactured in a
manner that it should not overflow the
oily food juices under the counter. The
pan supports can easily be removed
and the top burner plate can be
cleaned with soapy water, and rinsed
with a dry cloth.
Wash and rinse the gas burner
caps and the pan supports with soapy
water.
Never wash the gas burner caps
and the pan supports in the dishwasher.
For the dirts and stains on the burner
heads that can not be cleaned, use
the metal surface cleaners you can
obtain from the market according to
their instructions.
If is recommended that the acidic
matters such as oil, lemon etc. should
be cleaned immediately.
^ Use a damp cloth to clean the
interior and exterior. Never use any
sharp instruments, abrasive household
cleaner, or detergents for cleaning.
For hard stains use suitable washing
liquid.
Vifreous enamel hub
surround
Clean with a cloth wrung out in soapy
water. Stubborn stains can be removed
with a cream, paste or liquid cleaner.
Check that the cleaning agent used
is approved by the Vitreous Enamel
Development Council.
head
spark plug
Burner
Control panel
Wipe over the control panel with a
damp cloth and polish with a dry
cloth. Do not use oven cleaners or
aerosols, scouring pads or abrasive
powder for cleaning the plastic knobs
os damage will occur. Do not attempt
to remove any of the control knobs
from the panel as this may cause
damage and is a safety hazard.
Oven door
Wipe over the door outer panel with
a cloth wrung out in hot soapy water,
then after wiping with a cloth wrung
out in clear wafer, dry with a soft
clean cloth. Do not use scouring pads
or abrasive powder which may scratch
the surface. Take care during cleaning
not to damage or distort the door
seal. Ensure that the door seal is dry
after cleaning.
14