English – Инструкция по эксплуатации Vitek VT-3960 BK
Страница 9
ENGLISH
9
which you want to store in memory.
Note: you must select the station number while
the MEMORY indication is flashing, otherwise
the station will not be stored in the memory. If
the indication disappears before you select the
number of the station, repeat steps -.
PROGRAMMED RADIO STATIONS RECALL
To recall the programmed radio stations select
the corresponding frequency band (FM or MW
(AW)) and press the PRESET/FOLDER
or
buttons successively to select the desired
radio station.
Note: the preset stations are stored in memory,
while the device is plugged in and the battery is
not low. When the power is off or the battery is
low the preset radio stations will be erased from
memory. You will need to program them again.
CD PLAYBACK
Loading – open the CD compartment lid. Insert
a CD disc and close the CD compartment lid.
Ejecting – after the playback stops open the CD
compartment lid and eject the disc. Put the disc
in the case for storage.
Always close the CD compartment lid in order
to prevent it from getting dust. Always eject a
disc from the CD compartment if it is not being
played back.
. Switch on the cassette recorder by pressing
the STANDBY button.
2. Select the CD playback mode. To select it
press the FUNCTION button successively
until the “CD” indication appears on the
LCD-display.
3. Open the CD compartment. Insert a CD disc
and close the CD compartment. “READING”
will appear on the LCD display. Then number
of tracks and total playback time will appear
on the LCD-display.
If after a CD disc have been inserted the “NO
DISC” indication appears on the LCD-display,
check whether the disc is inserted properly. The
disc should be inserted with the label up.
. To playback the disc from the first track
press the PLAY/PAUSE button.
You can select a track, which will be played
back first. To do it, select a track using the
TUNING
/SKIP or TUNING
/SKIP
buttons, and then press the PLAY/PAUSE
button.
. To pause the playback, press the PLAY/
PAUSE button again. The “PLAY” indication
and the playback time will be constantly
flashing. To resume to playback mode press
the button once again.
6. To stop the playback, press the STOP
button.
Note: if the CD compartment lid is open, the
“OPEN” indication will appear on the LCD-
display.
PROGRAMMED PLAYBACK
You can program playback of tracks (max. 60
tracks) in a desired sequence.
. Switch on the cassette recorder by pressing
the STANDBY button.
2. Open the CD compartment. Insert a CD disc
and close the CD compartment.
3. When the CD playback is stopped, press the
MEMORY/CLK-ADJ button. The “MEMORY”
indication will be flashing on the LCD-
display, and track number “0” on the disc
and its programmed number “P-0” will be
displayed.
Select the desired track, successively
pressing the TUNING
/SKIP or TUNING
/SKIP buttons. To store the selected
track press the MEMORY/CLK-ADJ button.
Programming indication will switch to “Р-2”.
. Programming the next track: select the next
track, successively pressing the TUNING
/SKIP or TUNING
/SKIP buttons.
Then press the MEMORY/CLK-ADJ button
to store the selected track in memory. You
can program up to 60 tracks.
Press the MEMORY/CLK-ADJ button
successively to look through the list of
programmed tracks.
3960IM.indd 9
12.10.2007 15:50:40