Vitek VT-3960 BK - Инструкция (Страница 7)

ENGLISH
7
Time indication will start flashing on the
LCD-display. Use the TUNING
/SKIP
and TUNING /SKIP button to adjust
hours.
2. Press the MEMORY/CLK-ADJ button once
again. Minute’s indication will start flashing
on the LCD-display. Use the TUNING
/SKIP and TUNING
/SKIP button to
adjust minutes.
3. Press the MEMORY/CLK-ADJ button again
to store the preset value.
Note: When the unit is disconnected or battery
charge of reserve supply is low, current time in-
dications will be reset. When power is supplied
again, time indication will be constantly flashing.
In this case you will need to set time again.
ALARM SETTING
You can adjust your cassette recorder in a way
that the alarm will switch on and automatically
switch off at preset time every day. As a sound
signal you can use a disc, radio, a cassette, USB
and SD/MMC devices.
Note: if a cassette is chosen as a sound source,
press the PLAY button at first (23, pic. ).
. Alarm switching on time.
In the current time mode press the TIMER
button once. The “ON TIME” indication will
appear on the LCD-display, and the “TIMER”
indication will be constantly flashing.
Set the time for the alarm to switch on, as
described in the TIME SETTING chapter.
2. Alarm switching off time.
Press the TIMER button once again. The
“OFF TIME” indication will appear on the
LCD-display, and the “TIMER” indication will
be constantly flashing.
Set the time for the alarm to switch on, as
described in the TIME SETTING chapter.
3. Sound source setting.
Press the TIMER button again. The current
mode will appear on the LCD-display (for
instance: TUNER).
Press the MEMORY/CLK-ADJ button first,
then select the sound source, successively
pressing the TUNING
/SKIP or TUNING
/SKIP button. Press the MEMORY/
CLK-ADJ button again to store the selected
sound source.
. Alarm volume setting.
Press the TIMER button again. The previous
volume level will appear on the LCD-display
(for instance: VOL 20).
Press the MEMORY/CLK-ADJ button
first, then set the desired volume level,
successively pressing the TUNING
/SKIP or TUNING
/SKIP button. To
enter the preset volume level, press the
MEMORY/CLK-ADJ button again.
Note: you can change volume level in the
range of 0-0.
. Switching on the alarm.
Press the TIMER/SLEEP button. “TIMER”
will appear on the LCD-display.
When the preset time is reached, the alarm
will automatically switch on. To switch off
the alarm press the STANDBY button.
6. Switching off the alarm.
Press the TIMER/SLEEP button again. The
“TIMER” indication will disappear.
SETTING TIME FOR THE CASSETTE RE-
CORDER TO SWITCH OFF
(Only using the buttons on the remote control)
You can set time for the cassette recorder to
switch off (max. 90 minutes).
. In the radio/cassette mode press the
TIMER/SLEEP button. The “90” minutes
indication will appear on the LCD-display,
and the “SLEEP” indication will be flashing.
2. To change the time press and hold the
TIMER/SLEEP button on the remote control.
You can set time for the cassette recorder to
switch off in the range of 0-90 minutes with
0 minutes step.
3960IM.indd 7 12.10.2007 15:50:38