Vitek VT-3960 BK - Инструкция (Страница 8)

ENGLISH
8
3. When the preset time is reached, the
cassette recorder will automatically switch
off.
. To cancel the timer mode press the TIMER/
SLEEP button again. The “SLEEP” indication
will disappear. To switch off the cassette
recorder press the STANDBY button.
SETTING EQUALIZER/BASS
You can set one of the five preset modes of the
equalizer: FLAT, JAZZ, ROCK, CLASSIC and
POP.
. In a playback mode select the desired
mode, successively pressing the EQ/BBS
button. The following indications will
successively appear on the LCD-display:
FLAT, JAZZ, ROCK, CLASSIC and POP.
2. In order to amplify bass signals press and
hold the EQ/BBS button at least for 2
seconds. “X BAS ON’’ will appear on the
LCD-display.
To cancel low frequency amplification mode
press the EQ/BBS button again at least for
2 seconds. “X BAS OFF’’ will appear on the
LCD-display.
MUTE
(Only using the buttons on the remote control)
To mute sound, press the MUTE button on the
remote control.
Earphones jack
For individual listening to music through the
earphones (not supplied) connect them to the
earphones jack (32, pic. ). Use the VOLUME
or button to adjust volume. The speak-
ers will automatically turn off when headphones
are connected.
USING THE RADIO
This cassette recorder is equipped with electri-
cal digital tuning system. Besides that, you can
tune and store 20 radio station in each band FM
and MW (AM).
Radio reception
. Switch on the cassette recorder, pressing
the STANDBY button.
2. To select the TUNER mode press the
FUNCTION button successively. The
“TUNER’’ indication will appear on the LCD-
display.
3. To select FM or MW (AM) band press the
BAND button on the remote control.
. Tune to the desired radio station.
Manually: to select the desired station
press the TUNING
/SKIP or TUNING
/SKIP buttons successively.
Automatically: Press and hold the TUNING
/SKIP or TUNING /SKIP button
for more than  second; tuner will start
scanning and will stop it automatically when
a strong signal from the radio station is
found.
. Switch the MONO/STEREO mode. If the
stereo signal from FM radio stations is weak,
press the REPEAT/MONO-ST button to
improve sound quality, to switch on to the
MONO mode.
ANTENNA
For the best FM reception, completely extend
the FM ANTENNA (3, pic.) and direct it at the
desired angle. The device has a built-in antenna
in order to receive AM signals. Turn the device
left or right in order to achieve the best signal
reception.
PROGRAMMING RADIO STATIONS
You can tune and store 20 stations in each band
FM and MW (AM).
. Select the band and tune to the station,
which you want to program.
2. Press the MEMORY/CLK-ADJ button. The
“MEMORY” indication and the “00” station
indication will be flashing on the LCD-
display for 3 minutes.
3. Use the PRESET/FOLDER or
buttons to select the station umber from  to
20, under which you want to store the radio
station.
. Press the MEMORY/CLK-ADJ button again,
to store the settings.
. Repeat steps  –  for all radio stations,
3960IM.indd 8 12.10.2007 15:50:39