Инструкция по эксплуатации Dell PowerConnect 3448
Страница 34
l
Имя пользователя
, например "admin"
l
Пароль и подтверждение пароля
.
Нажмите клавишу
Enter.
Мастер
, шаг 3
Появится следующее сообщение
:
Next, an IP address is setup.
The IP address is defined on the default VLAN (VLAN #1), of which all ports are members. This is the IP address you use to access the
CLI, Web interface, or SNMP interface for the switch.To setup an IP address:
Please enter the IP address of the device (A.B.C.D):[1.1.1.1]
Please enter the IP subnet mask (A.B.C.D or nn): [255.255.255.0]
Введите
IP-адрес и IP-адрес маски подсети, например IP-адрес 1.1.1.1 и IP-адрес маски подсети 255.255.255.0.
Нажмите клавишу
Enter.
Мастер
, шаг 4
Появится следующее сообщение
:
Finally, setup the default gateway.
Please enter the IP address of the gateway from which this network is reachable (e.g. 192.168.1.1).Default gateway (A.B.C.D):[0.0.0.0]
Введите шлюз по умолчанию
.
Нажмите клавишу
Enter. Появится следующее сообщение (на примере описанных параметров):
This is the configuration information that has been collected:
==============================================================
SNMP Interface = [email protected]
User Account setup = admin
Password = *
Management IP address = 1.1.1.1 255.255.255.0
Default Gateway = 1.1.1.2
==============================================================
ПРИМЕЧАНИЕ
.
Если первый и второй пароли не совпадают
, выдается сообщение об ошибке до тех пор, пока они не станут одинаковыми.