Before first use, Daily use – Инструкция по эксплуатации Zanussi ZOB593
Страница 23
To bake and roast or as pan to collect fat.
Before first use
Warning! Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and
Cleaning".
Setting and changing the time
Set the time first to operate the oven.
When you connect the oven to the electrical supply or af-
ter a power cut, the symbol for the time and auto-
matically flashes.
1
2
Set the correct time with or .
Changing the time
1. Push again and again until the symbol flash-
es.
2. Set the correct time with or .
The clock shows the time and the flashing stops after ap-
proximately 5 seconds .
Pre-heating
1. Set function
and maximum temperature.
2. Let the appliance operate without the food for approx-
imately 1 hour.
3. Set function
and maximum temperature.
4. Let the appliance operate without the food for approx-
imately 10 minutes.
5. Set function
and maximum temperature.
6. Let the appliance operate without the food for approx-
imately 10 minutes.
This is to burn off the residue in the appliance. The acces-
sories can become more hot than usually. When you pre-
heat the appliance for the first time, the appliance can
make an odour and smoke. This is the usual effect. Make
sure the airflow is sufficient.
Daily use
Warning! Refer to "Safety information" chapter.
The display
1
2
3
1
Cooking function
2
Temperature
3
Time
Button
Function
Description
ON/OFF
To switch the appliance on or off.
SELECTOR
To set the oven function.
RAPID HEAT UP
To switch the rapid heat-up function on.
23