Roland vk-8m - Инструкция (Страница 57)

57
MIDI Implementation
Model: VK-8M (Combo Organ)
Date: Dec. 1, 2001
Version: 1.00
1. Receive data
* If the MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), messages
input to MIDI IN will be received as messages for the Upper part, regardless of their
channel number (Omni On).
* When the MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), MIDI
messages will control each part according to their MIDI channel number (Omni Off). At
the factory settings, each part is set to the following transmit/receive channels.
-----------------------
CONTROL | 1ch
UPPER ORGAN | 1ch
LOWER ORGAN | 3ch
PEDAL ORGAN | 2ch
SPRING SHOCK | 9ch
-----------------------
Channel Voice Messages
Note off
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number:0H - FH (ch.1 - ch.16)
kk = note number:
00H - 7FH (0 - 127)
vv = note off velocity:00H - 7FH (0 - 127)
*
When the MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), the input
to the MIDI IN will be handled as messages for the UPPER PART.
Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
kk = note number:
00H - 7FH (0 - 127)
vv = note on velocity:00H - 7FH (0 - 127)
*
When the MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), the input
to the MIDI IN will be handled as messages for the UPPER PART.
Control Change
Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
vv = expression:
00H - 7FH (0 - 127)
* If you want to control all of the Organ Parts, transmit data on the channel specified by
the CONTROL MIDI CH. setting (factory setting: channel 1). It is not possible to
separately control each part of the Organ Part.
* When the MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), this has
the same function as an expression pedal connected to the VK-8M’s EXPRESSION
PEDAL jack.
General Purpose Controller 2 (Controller number 17) (Wheel Brake)
Status 2nd byte 3rd byte
BnH 11H vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
vv = control value:
00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
* When MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), this is
received on the channel specified for CONTROL MIDI CH. (стр. 46) (factory setting:
channel 1).
* Not received when MIDI GENERAL CONTROLLERS SWITCH (стр. 45) is OFF.
Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
vv = control value:
00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
Sound Controller 1-9 (Controller number 70-78) (Harmonic Bars)
Status 2nd byte 3rd byte
BnH ccH vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
cc = control change number:46H - 4EH (70-78)
vv = control value:
00H - 7FH (0 - 127)
* Receives harmonic bar values.
* When the MIDI IN FUNCTION is set to SINGLE KEYBOARD MODE (стр. 20), the input
to the MIDI IN will be handled as messages for the UPPER PART.
* Not received when MIDI SOUND CONTROLLERS SWITCH (стр. 45) is OFF.
cc |H.Bar Feet
-------------+-------------------------------------
46H |16’
47H |5 1/3’
48H |8’
49H |4’
4AH |2 1/3’
4BH |2’
4CH |1 3/5’
4DH |1 1/3’
4EH |1’
* Control values and harmonic bars are related as follows.
vv |H.Bar Level
-------------+---------------------------------
00H - 0EH |0
0FH - 1CH |1
1DH - 2AH |2
2BH - 38H |3
39H - 47H |4
48H - 55H |5
56H - 63H |6
64H - 71H |7
72H - 7FH |8
General Purpose Controller 5 (Controller number 80) (Rotary
Speed)
Status 2nd byte 3rd byte
BnH 50H vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
vv = control value:
00H - 7FH (0 - 127)
* When MIDI IN FUNCTION is SINGLE KEYBOARD MODE (стр. 20), this is received on
the channel specified for CONTROL MIDI CH. (стр. 46) (factory setting: channel 1).
* Not received when MIDI GENERAL CONTROLLERS SWITCH (стр. 45) is OFF.
General Purpose Controller 6 (Controller number 81) (Rotary
Brake)
Status 2nd byte 3rd byte
BnH 51H vvH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
vv = control value:
00H - 7FH (0 - 127) 0-63 = SPIN, 64-127 = BRAKE
* When MIDI IN FUNCTION is SINGLE KEYBOARD MODE (стр. 20), this is received on
the channel specified for CONTROL MIDI CH. (стр. 46) (factory setting: channel 1).
* Not received when MIDI GENERAL CONTROLLERS SWITCH (стр. 45) is OFF.
Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number:0H - FH (ch.1 - ch.16)
pp = program number:00H - 05H (prog.1 - prog.6) (Registration)
08H - 0DH (prog.9 - prog.14)
10H - 15H (prog.17 - prog.22)
18H - 1DH (prog.25 - prog.30)
20H - 25H (prog.33 - prog.38)
28H - 2DH (prog.41 - prog.46)
* Not received when MIDI PROGRAM CHANGE SWITCH is OFF (стр. 45) (factory
setting: OFF).
* Registrations are received on the channel specified by CONTROL MIDI CH. (стр. 46)
(factory setting: channel 1).
* Registration numbers will be switched when MIDI IN FUNCTION is set to SINGLE
KEYBOARD MODE (стр. 20).
Channel Mode messages
All Sound Off (Controller number 120)
Status 2nd byte 3rd byte
BnH 78H 00H
n = MIDI channel number:0H - FH (ch.1 - ch.16)
*
When this message is received, all notes currently sounding on the corresponding
channel will be turned off.
Reset All Controllers (Controller number 121)
Status 2nd byte 3rd byte
BnH 79H 00H
n = MIDI channel number:0H - FH (ch.1 - ch.16)
*
When this message is received, the following controllers will be set to their reset values.
Controller Reset value
Hold 1 0 (off)
All Note Off (Controller number 123)
Status 2nd byte 3rd byte
BnH 7BH 00H
n = MIDI channel number:0H - FH (ch.1 - ch.16)
*
When All Note Off is received, all currently sounding notes of the corresponding
channel will be turned off. However if Hold 1 is on, the sound will be held until these are
turned off.