Формат midi-данных – Инструкция по эксплуатации Yamaha CLP-230 RU
Страница 80
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
CLP240E.book Page 80 Wednesday, April 6, 2005 4:02 PM
Формат MIDI-данных
Если вы знакомы с МЮ!-интерфейсом или используете компьютер для управления музыкальными устройствами при помощи создаваемых компьютером
МЮ!-сообщений, данные из этого раздела помогут вам управлять пианино С1Р-240/230.
1.
NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)*
vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity
* If received value exceeds the supported range for the
selected voice, the note is adjusted by the necessary num
ber of octaves.
2. CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number
vv = Data Range
(1) Bank Select
ccH Parameter
00H
Bank Select MSB
20H
Bank Select LSB
Data Range (vvH)
00H: Normal
00H...7FH
Bank selection processing does not occur until receipt of
next Program Change message.
(2) Modulation (reception only)
ccH Parameter
Data Range (vvH)
01H Modulation
00H-7FH
(3) Main Volume (reception only)
ccH Parameter
Data Range (vvH)
07H Volume MSB
00H...7FH
(4) Panpot (reception only)
ccH Parameter
Data Range (vvH)
0AH Panpot
00H-7FH
(5) Expression
ccH Parameter
Data Range (vvH)
0BH Expression MSB
00H...7FH
(6) Damper
ccH Parameter
Data Range (vvH)
40H Damper MSB
00H...7FH
(7) Sostenuto
ccH Parameter
Data Range (vvH)
42H Sostenuto
00H-3FH:off, 40H-7FH:on
(8) Soft Pedal
ccH Parameter
Data Range (vvH)
43H Soft Pedal
00H-3FH:off, 40H-7FH:on
(9) Effecti Depth (Reverb Send Level)
Data Range (vvH)
00H...7FH
ccH Parameter
5BH Effecti Depth
Adjusts the reverb send level.
(10) Effect4 Depth (Variation Effect Send Level)
ccH
Parameter
Data Range (vvH)
5EH
Effect4 Depth
00H...7FH
(11) RPN
ccH
Parameter
Data Range (vvH)
65H
RPN MSB
Coarse Tune 02H,
64H
RPN LSB
Fine Tune 01H,
Pitch Bend Range 00H
06H
Data Entry MSB
38H
Data Entry LSB
ИД CLP-240/230 Руководство пользователя
Data Range (vvH)
00H
Value
127 (max)
0 (off)
0 (off)
0 (off)
3. MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc =
Control number
vv =
Data Range
(1) All Sound Off
ccH
Parameter
Data Range (vvH)
78H
All Sound Off
00H
Switches off all sound from the channel. Does not reset Note
On and Hold On conditions established by Channel Messages.
(2) Reset All Controllers
ccH
Parameter
79H
Reset All Controllers
Resets controllers as follows.
Controller
Expression
Damper Pedal
Sostenuto
Soft Pedal
(3) Local Control (reception only)
ccH Parameter
Data Range (vvH)
7AH Local Control
00H (off), 7FH (on)
(4) All Notes Off
ccH
Parameter
Data Range (vvH)
7BH
All Notes Off
00H
Switches OFF all the notes that are currently ON on the spec
ified channel. Any notes being held by the damper or soste
nuto pedal will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH
Parameter
Data Range (vvH)
7CH
Omni Off
00H
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH
Parameter
Data Range (vvH)
7DH
Omni On
00H
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH
Parameter
Data Range (vvH)
7EH
Mono
00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH
Parameter
Data Range (vvH)
7FH
Poly
00H
Same processing as for All Sound Off.
• When control change reception is turned OFF in the Function
mode, control change data will not be transmitted or received.
• Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with “All Note Off” transmission).
• When a voice bank MSB/LSB is received, the number is
stored in the internal buffer regardless of the received order,
then the stored value is used to select the appropriate voice
when a program change message is received.
• The Multi-timbre and Poly modes are always active. No
change occurs when OMNI ON, OMNI OFF, MONO, or POLY
mode messages are received.