Panasonic NV-RZ1ENC - Инструкция (Страница 87)

D F F
D Z O O M ► F O X
T A L L Y l a m p ► o f f
4^ Sc
naHXKT ■ ■ «¡a
1
2
3
4
5
m [MENU] IS °
T' [CAM[;fW fUNCnONSl
mm
[A ▼] ^ F jgjf {CAMERA SETUP](iSilli'Si
la^) -smsisETje-
• ICAMERASnUPHiiSIII^M^S') “
mm
[ A T ] ® -
mm
[ m . sensor ] *■
m [SET] mmm [ on ] <>
m [MENU] iffl ■ jgaimii *■
• 1STD13YI m.Tv “
ihiElia ■
• ■ m-/4^
■ r^ijiii ica )} »
,n f JAm la^MEfiASLiUPi Xfpj |M SENSOR) [OfR] “
Kiirfiliii/il'iLiflzi'Aii-
ENGLISH
Motion-Sensor-Controlled Recording
In this mode, recording automatically starts when the built-in
Motion Sensor detects some movement in the picture,
1 Press the [MENU] Button.
•The [CAMERA FUNCTIONS] Main-Menu appears.
2
Turn the I A T ] Dial to select [CAMERA SETUP]
and then press the [SET] Button.
• The [CAMERA SETUP] Sub-Menu appears.
3
Turn the [ A T ] Dial to select [M.SENSOR].
4
Press the [SET] Button to select [ON].
5
Press the [MENU] Button to exit the menu.
•The Motion Sensor Function Stand-by [STDBYj
Indication appears.
• Approximately 1 second after the Movie Camera’s Motion
Sensor has detected movement in the picture, recording
automatically starts. Approximately 10 seconds after
movement in the picture has stopped, recording
automatically stops and the Movie Camera is in the Motion
Sensor Stand-by Mode.
•When the Movie Camera remains in the Motion Sensor
Stand-by Mode for more than 6 minutes, the Finder turns off,
and the [ (A] J Lamp goes out to conserve power.
When the Motion Sensor again delects movement in the
picture, recording automatically restarts afler approximately
4 seconds, and the Finder turns on, and the [(
a ]] Lamp
lights.
Cancelling the Motion Sensor Function During Stand-by
Set [M.SENSOR] on the [CAMERA SETUP] Sub-Meriu to
[OFF],
Cancelling the Motion Sensor Function During Recording
Press the Recording Start/Stop Button tor 2 seconds
9xf