Hyundai H-CMD4034 - Инструкция (Страница 12)

12 13
Operation Operation
General operations
Touch screen
Due to the touch screen, you can fulfill most
functions not only by pressing buttons but also
by touching the options you need.
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press Reset button on the inner panel with
a pointed object (such as a ballpoint pen) to
set the unit to initial state.
When some errors occur on the display,
you can also press Reset button to resume to
normal, and it will erase the clock setting and
some memorized functions.
Turning the unit on/off
Press PWR button on the RC or POWER/
MOD button on the panel to turn on the
unit. Press and hold the button more than 2
seconds to turn off the unit.
Display dimming/off
Press and hold MUT button on the panel or
/ button on the RC to dim the TFT display.
Press and hold this button again to switch off
the TFT. Press and hold for the third time to
enable the display.
Volume control
Press VOL+/VOL- buttons on the RC or
rotate VOL regulator on the unit to increase/
decrease the sound volume level.
Setting the sound characteristics
Repeatedly press SEL button on the RC or
on the unit to select the desired parameter in
the following order: VOL (volume) => BAL L.R
(balance left-right) => FAD R.F (fader rear/front)
=> BAS (bass) => TRE (treble). After selecting
the desired parameter, you can adjust its current
level by pressing VOL+/- buttons on the RC or
rotating VOL regulator on the unit.
Mute function
Press button on the RC or MUT button on
the unit to turn off the sound. Press the button
again or adjust volume to resume the sound
output.
Equalizer setting
While listening to music, you can select
the corresponding preset modes to adjust the
sound quality perfectly by using AF/EQ button
on the panel or on the RC. Press and hold
the button repeatedly to choose the following
modes in turn: POP => CLASS => ROCK =>
Off (no equalizer).
Loudness
Press and hold TA/LOUD button on the RC
or LOUD/TA button on the panel to activate
loudness function. This is to increase the low
frequency, which can improve sensitivity for your
ears. Keep pressing it again to quit this function.
Mode selection
• Repeatedly press MODE button on the RC
or POWER/MOD button on the unit to select a
mode: Radio => Media => TV => AV1 => AV2.
• In any mode touch item on the screen
to display the Main menu. In the menu, touch
the item of the mode you need to select the
corresponding mode.
The Media mode is only available
when a disc, USB or SD/MMC card is inserted
into the unit. IPOD and BT modes are not
supported by this unit.
Clear
After inputting false data, press CLEAR
button to clear it.
System setup
In any mode touch icon to go to setup
mode. When you select setup mode, the menu
will be displayed, in which you can touch any
item to perform operations. Setup menu includes