Error messages, Сообщения об ошибках, Повідомлення про помилки – Инструкция по эксплуатации Epson Stylus SX510W

Страница 54: أطلخا لئاسر, اطخ یاه ماغیپ, R& 54, R& 55, R& 56, R& 57

Advertising
background image



Error Messages

Solution

Press the OK button to replace ink cartridges.

Replace the expended ink cartridges.

R

& 58

Paper jam. Open the scanner unit and remove the paper.

R

& 62

Press the Start button to eject the paper inside. See your
documentation.

Paper is jammed in the printer. Turn off the printer, open the
scanner unit, remove paper. See your documentation.

R

& 63

No photos could be recognized. Make sure photos are
positioned correctly. See your documentation.

R

& 22

A printer error has occurred. Turn off the printer, then press On
button to turn on. See your documentation.

Turn the printer off and then back on. Make sure that no paper
is still in the printer. If the error message still appears, contact
Epson support.

A scanner error has occurred. See your documentation.

Turn the printer off and then back on. If the error message still
appears, contact Epson support.

The printer’s ink pads are nearing the end of their service life.
Please contact Epson support.

Contact Epson support to replace ink pads before the end of
their service life. When the ink pads are saturated, the printer
stops and Epson support is required to continue printing.

The printer’s ink pads are at the end of their service life. Please
contact Epson support.

Contact Epson support to replace ink pads.

Cannot recognize the memory card or disk.

Make sure the memory card or storage disk has been inserted
correctly. If so, check to see if there is a problem with the card or
disk and try again.

Cannot recognize the device.

Make sure the connected device is a storage device.

Communication error. Make sure the computer is connected.

Make sure the cable is connected correctly. If the error message
still appears, make sure that scanning software is installed on
your computer and that the software settings are correct.

The combination of IP address and subnet mask is invalid. See
your documentation.

See the Networking guide in the online User’s Guide for details.

Error Messages
Сообщения

об ошибках
Повідомлення

про помилки

أطلخا لئاسر

اطخ یاه ماغیپ

EN

EN

R

& 54

RU

R

& 55

UA

R

& 56

AR

R

& 57

FA

R

& 57

Advertising
Эта инструкция подходит к следующим моделям: