Beko CG 51010 - Инструкция (Страница 39)

Part 6:
Maintenan€e and €leaning
Turn off the mains switsh
before sleaning
a- Before switching on again ensure
that all controls ore in the OFF position.
Make sure that the oven, grill before
you start cleaning.
Your product is manufactured in a
manner that it should not overflow the
oily food juices under the counter. The
pan supports con easily be removed
and the top burner plate con be
cleaned with soapy water, and rinsed
with a dry cloth.
n- Wash and rinse the gas burner
cops and the pan supports with soapy
water. Never wash the gas
burner caps and the pan
supports in the dishwasher.
For the dirts and stains on the burner
heads that con not be cleaned, use
the metal surface cleaners you con
obtain from the market according to
their instructions.
interior and exterior. Never use any
sharp instruments, abrasive household
cleaner, or detergents for cleaning.
For hard stains use suitable washing
liquid.
Vitreous enamel hob
surround
Cleon with a cloth wrung out in soapy
water. Stubborn stains con be removed
with a cream, paste or liquid cleaner.
Check that the cleaning agent used
is approved by the Vitreous Enamel
Development Council.
Control panel
Wipe over the control panel with a
damp cloth and polish with a dry
cloth. Do not use oven cleaners or
aerosols, scouring pods or abrasive
powder for cleaning the plastic knobs
os damage will occur. Do not attempt
to remove any of the control knobs
from the panel os this may cause
damage and is a safety hazard.
Oven door
Wipe over the door outer panel with
a cloth wrung out in hot soapy water,
then after wiping with a cloth wrung
out in clear water, dry with a soft
clean cloth. Do not use scouring pods
or abrasive powder which may scratch
the surface. Take core during cleaning
not to damage or distort the door
seal. Ensure that the door seal is dry
after cleaning.
«V If is recommended that the acidic
matters such os oil, lemon etc. should
be cleaned immediately.
Use a damp cloth to clean the
15