Panasonic NV-DS15EN - Инструкция (Страница 93)

► AWB
PROGRAMME AE
0001.
[MNLi
MODE
SELECT
* 1
MENU
W.B/SHUnER/IRIS
O ))-s 2,3
MF/VOL/JOG
©
©
► bAd
i68’i7o)" eitttiiaT •
filSSp^Sfe^ililxS:) • a£iSll6i5afe¥illi (-» 102) ”
#tBiI[MNL]tg/Tx »
2 S[PUSH]^ “
3 «»[PUSH]^ ’ »
K»J3§P:AT?i№ff53(g :
O s»)efe¥i7tsiii5[AWB]
• )]i[OFF/ON]Pg||IS*tt[ON]^H5 • ilfXTilSIS « s
[CAMERA](aiSiiii);kfKiB ■ ■ g
• 5P*iSj;l§[CAMERAFUNCTIONS]±lim±[DIGITAL EFFECT]
(Siiiim) iSSt iC[EFFECT1] (as 1) iIsS*]S[GAIN
UP](iSiia®)S)' sgil§[EFFECT2)(aS2)iIISai[SEPIA]
(iffe)se[B/w](Ea) • 3§is>ia»afe¥iii ”
«»[PUSH]« • S^[AWB]íg/т^,^.т^ “
*]i[AUTO] "
ENGLISH
Recording with Natural Colours
(White Balance)
This Movie Camera automatically adjusts the white balance to
ensure that the pictures are recorded with natural colours. For
certain types of subjects and lighting conditions, however, this
Auto White Balance Adjustment Mode may not be able to
ensure natural colours (-► 168, 170). In these cases, you can
select either one of the 3 preset modes explained below
(indoor, outdoor, or the last manually adjusted white balance
setting), or you can manually adjust the white balance
(-> 102).
1
Set the Mode Selector Switch to [MNL].
The [MNL] Indication appears.
2
Press the [PUSH] Dial.
The [AWB] Indication appears.
3
Turn the [PUSH] Dial to select the desired
White Balance Mode.
The modes change in the following order:
O Automatic White Balance Adjustment [AWB]
© Last manually adjusted White Balance setting
(-M02)[ e A i ]
© Outdoor Mode [-;•;-]
O Indoor Mode [^j^c]
(recording under incandescent lamp)
• Be sure to remove the Lens Cap before setting the
[OFF/ON] Switch to [ON]. If the Lens Cap is still attached to
the Lens when the [CAMERA] Lamp lights, the Automatic
White Balance Adjustment may not be precise.
• If you have set [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu to
[GAINUP], or if you have set [EFFECT2] to [SEPIA] or
[BA/V], it is not possible to change the white balance.
Returning to the Auto White Balance Adjustment
Mode
Turn the [PUSH] Dial until the [AWB] Indication appears. Or,
set the Mode Selector Switch to [AUTO].
-100-