Binatone Active XA1001 - Инструкция (Страница 14)

14
If you have entered the correct code, you will hear a beep and
your answering machine now is in the normal answering mode
(OGM1). If you are not going to perform any other operations, just
hang up.
If you often keep your answering machine turned on while being
at home, you can give the CBT (Call Break-Through) code to several
people (e.g. your family) and they will be able to alert you about their
calls.
The CBT code consists of four digits whilst the factory preset is
0001.
Setting the CBT code
1. Press and hold the << button [23] for 2 seconds until you here the
words ‘Please enter the CBT Code’ and then you will hear 'zero'.
2. Using the << [23] and >> [24] buttons select the first digit of the
code.
3. Press the ANS ON/OFF button [27] to confirm the selected digit.
4. Using the << [23] and >> [24] buttons select the second digit of
the code.
5. Press the ANS ON/OFF button [27] to confirm the selected digit.
6. Using the << [23] and >> [24] buttons select the third digit of the
code.
7. Press the ANS ON/OFF button [27] to confirm the selected digit.
8. Using the << [23] and >> [24] buttons select the fourth digit of the
code.
9. Press the ANS ON/OFF button [27] to finish the code setting.
Using the CBT code
If you are at home and your answering machine is on, then the
callers knowing the CBT code can alert you to answer their calls.
To do this, a caller should:
1. Wait for the answering machine to answer.
2. During the 'Outgoing message' (OGM) playback press the '*'
(asterisk) button twice.
3. Wait for a long beep.
4. Enter the CBT code.
5. After entering of the CBT code a beep will also be heard.
When the caller enters the VIP-code your answering machine will
sound a long (30 seconds) loud beep alerting you to answer the call.
MAIN SPECIFICATIONS
Operating frequency Handset – 39.9375
÷40.1125 MHz
Base unit – 31.0375
÷31.2125 MHz
Operating distance Up to 250 m outdoor
Up to 50 m indoor
Battery operating time 80 hours in the Standby mode
7 hours in the Talk mode
Battery charging time – 15 hours
Ambient temperature Operation: from 0 0 Ñ to 40 0 Ñ
Storage: from -20 0 Ñ to 60 0 Ñ
Rechargeable battery Capacity 300 mAh, nickel-cadmium
Voltage Handset – 3.6V
Base unit – input 230V, output 9V