Samsung LE52A900G1F - Инструкция (Страница 21)

english - 1
Configuring Picture Option
1. Press the menu button to display the menu.
Press the enter button, to select "Picture".
. Press the ▲ or ▼ button to select "Picture Options", then press the enter button.
. Select the required option by pressing the ▲ or ▼ button, then press the enter
button.
. When you are satisfied with your setting, press the enter button.
. Press the eXIt button to exit.
In PC mode, you can only make changes to the “Colour Tone” and “Size” from
among the items in “Picture Options”.
Colour tone: Cool/Cool1/normal/Warm1/Warm
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected "Picture" mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
Size: auto Wide/1:/Wide Zoom/Zoom/:/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
1:: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
:: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component
(1080i/1080p) signals are input.
♦
♦
♦
♦
♦
♦
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ► or enter
button.
Zoom: Select by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up and down. After selecting
, use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
after selecting “Just Scan” in hDmI (100i/100p) or Component (100i/100p) mode:
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
reset: Press the ◄ or ► button to select “Reset”, then press the enter button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
You can select these options by simply pressing the P.SIZe button on the remote
control.
Screen mode: 1:/Wide Zoom/Zoom/:
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function
is intended for users to select it.
1:: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
:: Sets the picture to 4:3 normal mode.
♦
♦
♦
♦
This function is available in "Auto Wide" mode.
This function is not available in "PC", "Component" or "HDMI" mode.
Digital nr: off/low/medium/high/auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any
static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
➣
♦
➣
➣
♦
➣
➣
➣
➣
➣
➣
➣
➣
➣
♦
➣
➣
♦
➣
Picture
 more
Picture options 
reset : oK 
tV
move enter return
Picture options
Colour tone : normal 
Size : auto Wide 
Screen mode : 1: 
Digital nr : auto 
DnIe : off 
hDmI black level : normal 
100hz motion Plus: off 
blue only mode : off 
move enter return
tV
P
BN68-01625C-01Eng.indd 18 2008-08-19 �� 10:10:02