Elenberg DVDP-2420 - Инструкция (Страница 54)

54
Film: At the surrounding CH plus 10ms delay. PRO LOGIC mode
imitate PRO LOGIC I adopting logic 2;
Auto: means auto selecting mode according to a disc type.
• Only under audio out status, and “5.1CH” being chosen, can “PRO
Logic II be set.
• While in “PRO Logic II”, and choosing “On”, can go into next “Mode”
menu.
Select Panorama
On: means the front stereo extends to both sides, with a better
surrounding sense.
Select Dimension
Similar as front and rear balance control, adjusting gradually the
front and rear sound field, there are all 7 musical scale to be cho-
sen.
Select Center width
Adjusting center CH signal and di-
viding left /right CH, to let the sig-
nal emit from 3 front Speakers at
different degree.
3D Processing Page
In “Audio Setup Page ” menu use
▲/▼ button to move cursor choos-
ing “3D Processing ” and press [En-
ter] to go into “3D processing Page”
as the picture above, to do the settings on the “Reverb Mode”.
HDCD Setup Page
Press ◀ key back to the audio set-
ting page menu, and move ▲/▼
button to choose “HDCD”, press
[Enter] to go into HDCD Setup Page
menu, then press “▶” button to go
into the right submenu.
You can choose the corresponding
frequency on the digital filter, “Off ” means CD format is used.
KARAOKE Setup Page
In “Audio Setup Page ” menu use
▲/▼ button to move cursor choos-
ing “KARAOKE SETUP” and press
[Enter] to go into then press ▶ but-
ton to set the volume and mix of
the karaoke