Elenberg DW-9001 - Инструкция (Страница 36)

36
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Rather, use only a
cloth and warm soapy water. To remove spots or stains from the
surface of the interior, use a cloth dampened with water and a
little white vinegar, or a cleaning product made specifically for
dishwashers.
When You Go on Holiday
When you go on holiday, it is recommended that you run a wash
cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and
prevent odors from forming within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical po-
sition. If absolutely necessary, it can be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is
food that remains trapped in the seals. Periodic cleaning with a
damp sponge will prevent this from occurring.
CAUTION, for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH
THIS APPLIANCE. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.
Electrical Requirements
This dishwasher is designed for operation on an adequately wired
individual 220~240VAC,50~60HZ. Use required fuse 10 amp. Fused
electrical supply is required-copper wire only. Time delay fuse or
circuit breaker recommended and provide separate circuit serving
only this appliance. Outlet should be placed in adjacent cabinet.
Electrical connection
After making sure that the voltage and the frequency values for the
current in the home correspond to those on the rating plate and that
the electrical system is sized for the maximum voltage on the rat-
ing plate, insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be
connected is not appropriate for the plug, replace the socket, rather
than using an adaptors or the like as they could cause overheating
and burns.
ABOUT ELECTRICITY CONNECTION