Elenberg DW-9001 - Инструкция (Страница 34)

34
special jet on the lower spray arm and washed down the drain.
2. Coarse filter
Larger items, such as pieces of bone
or glass, that could clog the drain
are trapped in the coarse filter. To
remove an item caught in this filter,
gently squeeze the tabs on top of
this filter and lift it out.
3. Fine filter
This filter holds soil and food resi-
due in the sump area and prevents it
from being redeposited on the dish-
es during a cycle.
To clean the control panel use a lightly dampened cloth then dry
thoroughly. To clean the exterior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any
part of the dishwasher.
Protect Against Freezing.
1 Cut off electrical power to the dishwasher. Remove fuses or trip
circuit breaker.
2 Turn off the water supply and discon-
nect the water inlet pipe from the water
valve.
3 Drain water from the inlet pipe and wa-
ter valve. (Use a pan to catch the wa-
ter.)
4 Reconnect the water inlet pipe to the
water valve.
5 Remove the plastic sump cover in the tub the bottom and use a
sponge to soak up water in rubber boot.
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard water
chemicals will clog the spray arm jets and bearings. To remove the
spray arm, screw off the nut to take out the washer on top of the
spray arm and remove the arm. Wash the arms in soapy and warm
water and use a soft brush to clean the jets. Rep lace them after
rinsing them thoroughly.
Cleaning the Filters
For best performance and results, the filter assembly must be
cleaned.
CARING FOR THE DISHWASHER