Shivaki STV-22LED14E - Инструкция (Страница 17)

Help
He
lp
E
NG
Help
No Power Check the AC cord of TV is plus in or not. If still no power,
please pull out the plug and replug in after60 seconds. And
open the TV again
Signal receive not
properly To cause double image or phantom if there has high building
or high mountain round TV. You can adjust image effect by
manually operation: consult instruction of vernier regulation
or change the direction of external antenna.
If you use the indoor antenna . under certain circumstance,
receive will be more difficult .So you can change the
direction of the antenna to adjust the image effect. If can't
change image receiving effect either, you have to use
external antenna.
No picture Check the antenna at the back of TV is connected properly
or not.
Try to select other channels and check whether the TV
problem itself or not
but, Video is ok without
audio Increase the volume.
Check the TV is in mute mode or not and please press the
mute button to make sound resume.
Audio is ok, but color
error or no picture. Increase contrast and brightness.
snow statics picture and
noise Check the antenna at the back of TV is connected or not.
Level broken line vacuum, such as hairdrier, Maybe has electrical appliance
interfere please turn off these kinds of electrical appliance,
cleaner and so on.
Image or-Dual
"simulacrum" The TV
no response with the
Remote. Perhaps the location for the antenna is not good. Use the tall
beamed antenna can be improved quality of the display
image.
Operate the remote direct to the remote sensor on the TV. If
still no response for the TV, please check if the plastic bag
on the remote take or not. And check if the location for the
battery is correct. Change the new battery.
The TV will shift to the STAND BY if no response from the
remote in the few minutes.
NO Video In (PC Mode) Please check if the display cable connect to the VGA
correcte . Please check if there has the bend on the display
cable.
Vertical twinkling (PC
Mode) Enter the main menu, Use the clock regulator for the Video
display noise to eliminate the vertical line.
horizontal ripping (PC
Mode) Adjust the Audio sound horizontal in the main menu to clear
the horizontal ripping line.
The screen is too bright
or too dark (PC Mode) Adjust the contrast ratio or brightness in the main menu.
PC Function no
response Check the computer setting in the state of compatible
display resolution
Ripping line in RCA
connecting Please use good quality connecting cable.
Problem still exist Unplug the power cable and wait for 30 seconds, then
connect. If there is some problem with our TV, do not repair
it by yourself, please contact with the customer service
center.
There will be complete picture and the brightness will come down if the TV is in: Note So please do not keep the TV in a state of
same, the static picture for too long time Menu or same picture that has much difference in brightness and contrast ratio for too
long time.
15