Saturn ST-EC8772 - Инструкция (Страница 6)

10
(3) Insert the bread pan and push down on rim until it snaps securely into place, fold
handle down; close the lid.
(4) Power on, LCD display will show “MENU 1 TIMER 3:25”, Press MENU button
and observe LCD display, select 1-12menu (BASIC, FRENCH, WHOLE WHEAT,
SWEET, CAKE, GLUTEN FREE, SUPER RAPID, DOUGH, PASTA, BUTTER
MILK, JAM, BAKE) as you needed.
(5) After menu selection, press COLOR button to get LIGHT or MEDIUM or DARK
or Rapid. Default setting is Medium.
(6) Press LOAF to select 1000g, 1250g, 1500g, default setting is 1250g.
(7) If you need adjust time, press TIMER to adjust time as required, the calculation
method as below:
Working Time =Menu original time+ adjusting time
(8) Press the START/STOP button for 0.5S, the program will start and “∶” blinks
* If you want to change current setting, press again the START/STOP for more than 1s,
the program will stop and reset the program you want. During programming, better not
to touch control panel.
(9) When unit display 0:00, The appliance buzzes 15 times and unit will go to keep
warm cycle, “ ” will still blinks (except Dough menu).After 1 hour warm, the bread
maker will buzz 1 time and “ ” will stop blinking and return the initial status. Press
STOP for 1s to stop warming process if you want to suspend warming process, then
return to initial status.
(10) The buzzer will sound when the bread is done. Wear over mitts, turn the bread pan
upside down and shake to release the bread. Be sure to remove the kneading blade
from the bread. If you want to take out bread during working, press START/STOP for
1s to stop machine firstly.
2. DOUGH Operating Instruction
This function operating is similar to Bread operating. When make dough, you should
not add salt, sugar, milk powder, etc. When the buzzer sounds 5 times, dough is
finished.
3. Baking Operating Instruction
This program is used for baking breads Bread, the working time is 1H, operation step
as below:
1)
Place the bread pan into the bread maker.
2) String the ready food together and reliably hold it into the bread pan. Close the
lid.
3)
Press the MENU button, observe LCD display and select 12th menu BAKE.
4) Press the START/STOP button to start baking bread.
5) When display show 0:00, the baking is finished. The buzzer sounds 10 buzz and
go to warm cycle, press Start /Stop for 1s to stop machine or it will go to warm cycle
automatically.
6)
During baking, if you find it has been cooked, you may press the STOP button to
stop working and go to menu selection.
11
CAUTION: It is better to have the food cut and align reasonably, and equality place
and keep some distance in order to get good baking. When first using, baking time is
difficult to control. Do not worry, next time you must do it better.
5. Special Function Instruction
1. Power down memory instruction
This bread maker has power down memory function. During programming, if suddenly
power down no more than 10 minutes, then power on again and still renew the current
work program; but total working time may be changed and no equal to original setting
time：
Actual working time= power down time + original setting time.
If power down time excess 15minutes, the bread maker can not ensure to renew the
current working status. If not start programming but power down, it will renew original
power on status.
2. Alarm and self-protection Function Instruction under over temperature or
abnormal
Bread maker have the function of initial condition estimation on MENU and self-
protected on abnormal unit. If you find unclear or abnormal using, please refer to the
following explanation to judge and dispose in time.
(1) working condition judge function
If current working condition is not suitable for initial condition requirement on current
menu. For example: when select BREAD or DOUGH program, bread maker inner
temperature is too hot or too cold that cannot meet initial condition requirement, that
is, inner temperature is lower than -10
0 C or higher than 50 0 C; at this time, you start to
program, bread maker will automatically forbid working, display will show “E00”or
“E01”, meanwhile, the buzzer will sound constant short prompt.
Under this condition, please take out the bread pan and allow unit to wait the suitable
temperature for work. If you still cannot use the bread maker normally, maybe have
some trouble on this unit; please contact Consumer Service for repair or replacement.
(2) auto-judge function
The bread maker has auto-judge function on abnormal unit, such as temperature sensor
open or short etc.
When temperature sensor open, display will show “EEE”, meanwhile the buzzer will
sound constant short prompt.
When temperature sensor short, display will show “HHH”, meanwhile the buzzer will
sound constant short prompt.
If happen such case, please contact Consumer Service for repair or replacement.
1. Buzzer prompting and LED function instruction
(1) When RESET, one long buzz will be emitted.
(2) Under normal operation on buttons (Press MENU or COLOR or“▲”, “▼” etc.),
buzzer will buzz one time. Constant press will cause constant buzz.
(3) Every press on Start/Stop will cause resultant buzz (one time)