Saturn ST-FP1095 - Инструкция (Страница 3)

4
appliance or any part of it is likely to be
damaged, to avoid risk of fire, electric
shock or any other damage and/or inju-
ries to persons. The appliance is likely to
be damaged if the appliance has been
subject to inadmissible strain (e.g. over-
heating, mechanical or electric shock), or
if there are any cracks, excessively frayed
or melted parts, or distortions, or if the
appliance is not working properly. In this
case, immediately unplug the appliance
and return the entire appliance (including
all parts and accessories) to an author-
ized service centre for examination and
repair.
• Repair and technical maintenance of the
appliance or power cord are only allowed
to
be accomplished by an authorized service
center.
• During operation keep the appliance in
an appropriate distance of at least 10 cm
on each side and 50 cm in front and
above to furniture, walls, boards, cur-
tains, and any delicate objects. Before
operation, always ensure that the appli-
ance is assembled properly and com-
pletely.
Solely use the appliance for processing
edible food. Immediately unplug the ap-
pliance,
if there is any kind of malfunction or
problem (e.g. the motor gets stuck,
overheating).
• Operate the appliance on a well acces-
sible, stable, level, dry, water-resistant
and suitable large table or counter. Al-
ways keep the appliance and the table or
counter clean and dry, and wipe off
spilled liquids immediately. Do not place
any clothes or tissue or other objects
under or on the appliance during opera-
tion, to avoid risk of fire, electric shock
and overheating.
Do not place the appliance over a power
cord, or near the edge of the table or
counter,
or on wet or inclined surfaces, or where it
can fall.
• This appliance is NOT intended for use
by persons (including children) with re-
duced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the appli-
ance by a person responsible for their
safety. Children must be supervised to
ensure that they do not play with the
appliance or any parts of the appliance or
the packaging.
Always keep the appliance where it is dry
and clean and where young children can-
not reach it.
Do not leave the appliance unattended,
when it is in reach of young children or
when the appliance is connected to the
power supply. Do not place any hard
and/or heavy objects on the appliance or
any part of it. Take care that no one will
pull the appliance by the power cord.
• Do not use any hard, sharp or edged
objects (e.g. knives, forks) with the ap-
pliance. Only use the provided pusher for
feeding food into the feed tube. Do not
handle the appliance or any part of it with
violence. Do not let the motor work con-
tinuously for more than 3 minutes.
Always use only one matching sets of
tools to avoid damage (see: “Knowing
Your Design Mincer”). For mincing, al-
ways use only one of the provided grind-
ing discs. Do not process bones, nuts,
frozen foods or any other hard items.
• Do not place the appliance or any part
of it on or near hot surfaces (e.g. burner,
heater
or oven). Do not use any parts or tools of
the appliance with any other device.
• Do not grasp in the gear hole of the
motor housing, with the appliance con-
nected to the power supply.
If you have forgotten to switch OFF
the appliance, before disconnecting
from the power supply, wait at least
10 seconds, before inserting the plug
into the power socket again.
• Do not leave the appliance unattended
during operation. Always switch off
(ON/OFF
switch) at first, then unplug the appli-
ance, and wait until the motor comes to a
standstill, before moving, or cleaning, or
assembling or disassembling any parts,
or when the appliance is not in use. Al-
ways grasp the motor housing at both
sides near the bottom for moving or lift-
ing. Do not hold the appliance at the feed
pan or worm housing, for moving the
appliance.
• Do not use any abrasive cleaners,
cleaning pads (e.g. metal scouring pads),
or any corrosive chemicals (e.g. bleach)
for cleaning. Do not immerse the motor
housing or power cord in water or any
other liquid. Do not spill or drip any liq-
uids on the motor housing, or on the
power cord to avoid risk of fire and elec-
tric shock. Do not pour any liquids in the
feed tube with the worm housing con-
nected to the motor housing! When liq-
uids are spilled on the motor housing,
immediately unplug the appliance, switch
off the appliance completely
(ON/OFF button), and wait for the appli-
ance to cool down. Thereafter, clean and
dry the appliance thoroughly (see: “Care
and Cleaning”).
• Do not place the appliance or any
of its parts or tools in an automatic
5
dishwasher.
• Do not leave any food dry on the appli-
ance. Always clean the appliance after
each use to prevent a build up of baked-
on foods (see: “Care and Cleaning”). Al-
ways keep the appliance and the tools
clean.
• Only use spare parts and accessories
which are provided and recommended by
the manufacturer. Damaged or improper
parts may break in use, damage the ap-
pliance or cause injury.
• Never try to take the appliance to piec-
es or open it.
• Never cover the air box on the back of
the appliance. The air has to able to cir-
culate.
• Never immerse the motor block in wa-
ter! Short-circuit danger! Do not put any
cloth or napkins underneath the appliance
to avoid endangering by fire and electric
shocks.
• Do not use the appliance in moist and
wet areas.
• Check the power cord regularly for wear
and damage.
• Never clean or operate the appliance or
parts of the appliance with abrasive or
hard sharp-edged items. Never put the
appliance or parts of the appliance in the
dishwasher for cleaning!
• Do not use the appliance if it is dam-
aged or parts of the appliance are dam-
aged. Do not use the appliance if it does
not function properly or if it was exces-
sively loaded. The appliance is likely
damaged if the appliance or parts of the
appliance show cracks, exorbitant wear-
ing down, alterations or leaks. It is also
likely damaged if the drive wheel of the
motor housing moves slowly. Take the
appliance for technical maintenance and
repair to an authorized service centre.
• Never use force assembling or disas-
sembling the appliance. The single parts
should be easily put together. Only oper-
ate the mincer after it has been carefully
assembled.
• Never use the crossed-blade knife and
grinding disc in combination with the
chopper attachments.
Only use either the crossed-blade knife
with the grinding disc or the chopper at-
tachments at once.
• For the case that the worm housing or
the closing ring loosen while operating
turn off the appliance immediately and
pull the plug. Operate according to the
instructions “Troubleshooting” before
turning the appliance on again.
• Always turn the appliance off, wait for
the motor to stop moving and then pull
the plug before disassembling the mincer.
• Never push the food into the feeding
tube with your fingers. Always use the
feedstick
for this purpose! The mincer can not
mince hard or stingily ingredients (for
example: bones, nuts, ginger). If you use
hard ingredients like onions or carrots,
you have to steam them before adding
them to the meet otherwise they can
block the motor. If the motor is blocked
turn off the appliance immediately and
operate according to the instructions
›Troubleshooting‹.
• Before the mincer is used for the first
time, all parts – with the exception of the
motor
block – must be thoroughly cleaned in
warm soapy water.
• To ensure that the mincer does not
seize, never operate it under excessive
pressure.
• Instantly switch off the mincer if the
worm or knife get blocked by a hard ob-
ject and
wait for approx. 6 seconds to be certain
that the motor is no longer running.
Switch on the mincer after it has been
cleaned.
• Never use force operating the appli-
ance to avoid damage of the units of the
appliance.
• Never hold your face or other body
parts over the feed tube when the motor
is running because little pieces of food
could be thrown out of the feed tube.
• Take care handling the crossed-blade
knife because it is very sharp.
• Never put foreign substance or hard
objects into the feed tube.
• Never repair the mincer yourself. If
you discover or suspect a fault, send the
mincer immediately to an authorised ser-
vice centre for competent examination
and repair.
• Store and use the appliance in a clean,
frost free environment where it is pro-
tected from dampness, moistness and
immoderate and extraordinary burden
(such as: downfall, beat, overheating,
moisture in the motor block).
Important safeguards for electrical
appliances
The appliance is driven electrically. Place
the appliance near a suitable wall power
socket to connect the appliance directly
to a protected mains power supply with
protective conductor (earth/ground) con-
nected properly. Ensure that the voltage
rating of your mains power supply corre-
sponds to the voltage requirements of the
appliance (220-230 V, 50 Hz, rated for at
least 8 A).
The installation of a residual current op-
erated circuit breaker (r.c.c.b.) with a
maximum rated residual operating cur-
rent of 30 mA in the supplying electrical