BOSS br-1200cd - Инструкция (Страница 343)

345
MIDI Implementation
Ãëàâ
à
9
Re
v0.02
Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Expression: 00H - 7FH (0 - 127)
* When the MIDI parameter “MIDI Fader” is set to ON, this is transmitted via the MIDI
channel set for the EXP PEDAL when the EXP PEDAL is operated.
Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
pp = Program number: 00H - 7FH (prog.1 - prog.128)
* Transmitted according to the content of the SMF during playback of SMFs.
* When the MIDI parameter Effects P.C. is set to PC ONLY or PC+BANK, this is
transmitted via the MIDI channel selected in the Effects Channel setting when insert
effects patches are switched.
* For the correspondence between Bank Select/Program numbers and the insert effect
patch banks/numbers, see стр. 343.
Channel Pressure
Status 2nd byte
DnH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Channel Pressure: 00H - 7FH (0 - 127)
* Transmitted according to the content of the SMF during playback of SMFs.
Pitch Bend Change
Status 2nd byte 3rd byte
EnH llH mmH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
mm, ll = Pitch Bend value: 00 00H - 40 00H - 7F 7FH (- 8192 - 0 - +8191)
* Transmitted according to the content of the SMF during playback of SMFs.
Channel Mode Messages
* Transmitted according to the content of the SMF during playback of SMFs.
All Sound Off (Controller number 120)
Status 2nd byte 3rd byte
BnH 78H 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
Reset All Controllers (Controller number 121)
Status 2nd byte 3rd byte
BnH 79H 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
All Notes Off (Controller number 123)
Status 2nd byte 3rd byte
BnH 7BH 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
Omni Off (Controller number 124)
Status 2nd byte 3rd byte
BnH 7CH 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
Omni On (Controller number 125)
Status 2nd byte 3rd byte
BnH 7DH 00H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
Mono (Controller number 126)
Status 2nd byte 3rd byte
BnH 7EH mmH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
mm = mono number: 00H - 10H (0 - 16)
Poly (Controller number 127)
Status 2nd byte 3rd byte
BnH 7FH 00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
System Common Messages
Quarter Frame Messages
Status Second
F1H mmH (= 0nnndddd)
nnn = Message type: 0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
dddd = 4 bit nibble data: 0H - FH (0 - 15)
* If the Sync parameter “Sync Gen.” is set to “MTC,” quarter frame messages of the time
code type specified by “MTC Type” will be transmitted when the BR-1200CD is running
(recording or playing). The transmitted time counts are summed to “SMPTE (MTC)
Offset Time” as the song top is “00:00:00:00”.
Bit Field is assigned as follows.
Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No. (0-29)
Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
Hours Count xyyzzzzz
x Reserved (0)
yy Time Code Type
* The time code types defined by the MIDI specification correspond to the BR-1200CD
Sync parameter “MTC Type” as follows.
MIDI specification setting “MTC Type” setting
0 = 24 Frames / Sec 24
1 = 25 Frames / Sec 25
2 = 30 Frames / Sec (Drop Frame) 29D
3 = 30 Frames / Sec (Non Drop Frame 29N or 30
zzzzz Hours
Song Position Pointer
Status 2nd byte 3rd byte
F2H mmH nnH
mm, nn=Song position point: 00H 00H - 7FH 7FH
* The current position is transmitted by the Song Position Pointer Message when the BR-
1200CD is stopped, or the locate operation has been performed, if the SYNC parameter
“Sync Gen.” is set to “MIDI CLOCK.”