Midi implementation, Ãëàâ à 9, Re v0.02 – Инструкция по эксплуатации BOSS br-1200cd
Страница 341: Receive data, Channel voice messages, Channel mode messages, Control change, Program change
343
Ãëàâ
à
9
Re
v0.02
DIGITAL RECORDING STUDIO
Date: Dec. 1, 2004
MIDI Implementation
Model: BR-1200CDVersion: 1.00
1. Receive data
Channel Voice Messages
Note off
Status
2nd byte
3rd byte
8nH
kkH
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
kk= Note number:
00H - 7FH (0 - 127)
vv = Note off velocity:
00H - 7FH (0 - 127)
Note on
Status
2nd byte
3rd byte
9nH
kkH
vvH
n = MIDI channel number:
0H - FH(ch.1 - ch.16)
kk= Note number:
00H - 7FH(0 - 127)
vv = Note on velocity:
01H - 7FH(1 - 127)
*
Received via drums MIDI channel when the MIDI parameter “Drums Ch.” is set to 1–16;
plays drum sound.
*
Received via bass MIDI channel when the MIDI parameter “Bass Ch.” is set to 1–16;
plays bass sound.
*
Drum sounds correspond to note numbers as follows.
Drum name
Note number
Hi-Q
D#1 (27)
Stick
G 1 (31)
Metronome (click)A 1 (33)
Metronome (bell) A#1 (34)
Kick 2
B 1 (35)
Kick 1
C 2 (36)
Snare 1
D 2 (38)
Snare 2
E 2 (40)
Tom 1
F 2 (41)
Closed hi-hat
F#2 (42)
Tom 2
A 2 (45)
Open hi-hat
A#2 (46)
Tom 3
C3 (48)
Crash cymbal
C#3 (49)
Tom 4
D 3 (50)
Ride cymbal
D#3 (51)
Cow bell
G#3 (56)
Claves
D#5 (75)
Control Change
Bank Select (Controller number 0, 32)
Status
2nd byte
3rd byte
BnH
00H
00H
BnH
20H
llH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm,ll = Bank number:
00 00H - 7F 7FH (bank.1 - bank.16384)
*
When the MIDI parameter Effects P.C. is set to PC+BANK, this is transmitted via the
MIDI channel selected in the Effects Ch. setting when insert effects patches are switched.
Volume (Controller number 7)
Status
2nd byte
3rd byte
BnH
07H
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Volume:
00H - 7FH (0 - 127)
*
Received via each track’s MIDI channel when the MIDI parameter “MIDI Fader” is set to
ON; controls the track volume.
Expression (Controller number 11)
Status
2nd byte
3rd byte
BnH
0BH
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Expression:
00H - 7FH (0 - 127)
*
Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter “MIDI
Fader” is set to ON; controls the effects in the same manner as operating the EXP
PEDAL.
Program Change
Status
2nd byte
CnH
ppH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
pp = Program number:
00H - 7FH (prog. 1 - prog. 128)
*
When the MIDI parameter Effects P.C. is set to PC ONLY or PC+BANK, this is received
via the MIDI channel selected in the Effects Channel setting and is used to switch the
insert effects.
*
Bank Select and Program numbers correspond to the insert effect patch banks and
numbers as shown below.
Channel Mode Messages
All Sound OFF (Controller number 120)
Status
2nd byte
3rd byte
BnH
78H
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
*
Received via drums MIDI channel when the MIDI parameter “Drums Ch.” is set to 1–16;
mutes the playing drum sounds.
*
Received via bass MIDI channel when the MIDI parameter “Bass Ch.” is set to 1–16;
mutes the playing drum sounds.
Reset All Controllers (Controller number 121)
Status
2nd byte
3rd byte
BnH
79H
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
*
Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter “MIDI
Fader” is set to ON.
*
When this message is received, the EXP PEDAL is reset to 127.
All Note Off (Control number 123)
Status
2nd byte
3rd byte
BnH
7BH
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
*
Received via bass MIDI channel when the MIDI parameter “Bass Ch.” is set to 1–16;
turns the playing bass note off.
Bank Select
Program
Number
Patch
MSB
LSB
Bank
Number
00H
00H
00H–77H
GUITAR
P001–P120
01H
00H–31H
MIC
P001–P050
03H
00H–31H
STEREO
P001–P050
04H
00H–31H
SIMUL
P001–P050
01H
00H
00H–77H
GUITAR
U001–U120
01H
00H–31H
MIC
U001–U050
03H
00H–31H
STEREO
U001–U050
04H
00H–31H
SIMUL
U001–U050
02H
00H
00H–77H
GUITAR
S001–S120
01H
00H–31H
MIC
S001–S050
03H
00H–31H
STEREO
S001–S050
04H
00H–31H
SIMUL
S001–S050