Beko CS 61110 - Инструкция (Страница 46)

Conventional Ovens
&: Oven lamp and warning lamps light on.
The heating elements are out of operation.
5 . 3 Operating the ovens - controlled by single knob
* The oven/or grill knob can only be rotated clockwise
from the OFF position .
* Turn the oven on by rotating the oven knob clockwise.
* Adjustment of the temperature in the oven is also made
by using this knob.
*The temperature values are written on the oven control
knob. The amber temperature indicator light will glow
until the pre-set temperature set using the oven knob is
reached. Once the temperature has been reached, the
amber light will go off and then cycle on and off during
use to maintain the pre-set temperature. The table is a
guide on cooking different types of food with the related
cooking temperatures.
* You can obtain additional energy savings by switching
off the oven five minutes prior to the end of the cooking
period, provided that the oven door is not opened
* Ensure you stand back from the appliance when opening
the oven door to allow any build up of steam or heat to
escape.
If, whilst cooking, steam produced comes in to contact
with cool surfaces on the outside of the appliance, it will
condense and produce water droplets.
This is quite normal and is not a fault.
(Temperature range): The lower and upper
heating element are on under the thermostat
control.
fp Only the lower heating element is
controlled.
(□ ): Upper heating element is controlled
(□ ): Means only the grill heating element is
on.
You must bring to the heating control knob to
the maximum temperature.
Means both grill element and rôtisserie
function are on.
To set the knob "0" position after the stage □,
turn the knob in the counter-clockwise direction.
Turbo Ovens
(B ): Oven lamp, warning lamps and
fan are on.
[Temperatuire range): The turbo
heating element is on under the
thermostat control.
Q): Means only the grill heater and
lamps are on.
You must bring to the heating control
knob to the maximum temperature.
fl^l) Means both grill element and
rôtisserie function are on.
To set the knob "0" position after the
stage □, turn the knob in the counter­
clockwise direction.
Burning off the protective coating process.
In order to burn off the protective coating remove shelves and baking tray by turning your oven to 250“C
for to 30 minute periods without putting anything into it.
You must ensure this operation is conducted in a well ventilaled area.
16