Cleaningtheself-cleaningrecharger – Инструкция по эксплуатации Panasonic ES-LV95
Страница 17
17
English
►Replacingthesystemouterfoil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil frame mark (
) and the
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
2
1
1
►Replacingtheinnerblades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
2
1
►Replacementparts
Replacement parts are available at your dealer or Service Centre.
Replacement parts for
ES‑LV95
System outer foil and inner
blades
WES9032
System outer foil
WES9173
Inner blades
WES9170
Special Detergent for Shaver Cleaning & Charging
System
WES4L03
Cleaningtheself-cleaningrecharger
Beard trimmings may become attached to the cleaning tray of the
self‑cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the cleaning
liquid.
1. Be sure to remove the cleaning liquid unit
and the appliance plug from the self‑
cleaning recharger.
• Be careful not to spill the cleaning liquid.
• Some cleaning liquid components and
skin oil may separate and adhere to the
cleaning liquid unit and cleaning liquid
filter. This does not indicate a problem.
2. Pour water as illustrated while
tilting the cleaning liquid unit
and shaking it gently.
• You can clean with the
cleaning liquid filter removed.
• After washing, be sure to
attach the cleaning liquid
filter.
3. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened with
water.
• Clean the corners and uneven parts of the
cleaning tray with a cotton swab
dampened with water.