Before use, Directions for use, Assembling – Инструкция по эксплуатации Binatone MGR-3002
Страница 6: Dismantling, How to mince meat
6
BEFORE USE
Remove all packing materials from the
appliance.
Wipe the housing with damp lint free cloth and
wash all parts to be in contact with food.
Rinse the washed parts of the appliance with
clean water and completely dry them before
assembling.
DIRECTIONS FOR USE
Before assembling/dismantling make sure the
appliance is turned off and unplugged.
Assembling
Insert the screw
1.
(8) into the feeding container
(5).
Put the cross-shaped cutter
2.
(9) on the end of the
screw (8) so that the rounded tip of the cutter (9) is facing the screw
(8). Make sure the cross-shaped cutter (9) is properly fixed.
Place the selected perforated disc
3.
(10) on top of the cutter (9)
so that the projection on the feeding container (5) fit the slot in
the disk.
Tighten the feeding container nut
4.
(11) applying some afford in
order to improve mincemeat quality.
To attach the feeding container
5.
(5) to the housing (1) insert it into
the opening in the grinder’s housing and turn anticlockwise until
it is properly fastened.
Place the tray
6.
(6) on top of the funnel of the feeding container (5).
Now the grinder is ready for operation.
Dismantling
Press the release button
1.
(16) and turn the feeding container (5)
clockwise. Remove the feeding container (5) from the motor.
Untwist the feeding container nut
2.
(11).
Remove the perforated disk
3.
(10) and cross-shaped cutter (9) from the
screw (8). Remove the screw (8) from the feeding container (5).
How to Mince Meat
Place the grinder on a dry, smooth flat horizontal surface.
1.
Remove the meat from the package. Cut out all bones and tendons
2.
from the meat prior to grinding. Cut the meat into pieces that will
fit easily into the feeding container (5).
Attention: never use frozen meat or meat with bones as it can
cause motor overload and its breakage.
Assemble the meat grinder and plug it into a power supply with
3.
voltage matching the information on the appliance.
Put the meat into the tray
4.
(6).
Switch on the appliance using the On/Off button
5.
(2).
Gradually push the meat pieces into the funnel using the pusher
6.
(7). Do not push too hard.