Microlife AG1-20 - Инструкция (Страница 13)

6. Care and maintenance, recalibration
With proper care and maintenance, this blood pressure measuring device will provide years of
satisfactory service. Follow the general rules below:
• Do not drop.
• Never inflate beyond 300 mmHg.
• Do not expose the device to either extreme temparatures, humidity, or direct sunlight.
• Never contact the cuff fabric with a sharp instrument, since this could cause damage.
• Always deflate cuff completely before storage.
• Do not dismantle manometer under any circumstance.
• Store the whole device in storage bag provided, to keep all the parts clean.
• Storage temperature condition: ­20 - +70 °C at a relative air humidity of 85 % (non-condensing).
• Wipe off the manometer and bulb with a damp cloth. Sterilization is not necessary, since the parts
of manometer should not come into direct contact with the patient‘s body during measurement.
• Remove the bladder first, and wipe the closer, bladder and tubes with a damp cloth. The cuff can
be washed with soap and cold water. But do rinse the cuff with clear water and keep it air dry.
Periodical recalibration
Sensitive measuring devices must from time to time be checked for accuracy. We therefore
recommend a periodical inspection of the static pressure display
every 2 years.
Your specialist dealer would be pleased to provide more extensive information about this.
7. Guarantee
This blood pressure monitor is guaranteed for 2 years from date of purchase. This guarantee
includes the instrument and the cuff. The guarantee does not apply to damage caused by
improper handling, accidents, not following the operating instructions or alterations made to the
instrument by third parties.
The guarantee is only valid upon presentation of the guarantee card filled out by the dealer.
Name and company address of the responsible dealer:
10