ZELMER 13Z015 - Инструкция (Страница 96)

13.3. Take off the water tank (1) and the drip tray (8) with the grid (7) from the espresso machine (Fig. 11).
Put the machine upside down and take off the filter grid from the filter head (4) unscrewing the grid with the use
an appropriate screwdriver (Fig. 12).
13.4.
of
13
reviously solution of the citric acid.
13.9.
13.5. Clean the filter grid and the filter head (4), remove the lime and coffee remains.
.6. Set the espresso machine back on the work position.
13.7. Fill the water tank (1) with prepared p
13.8. Close the cover of the water tank (1) and then put the tank (1), the drip tray (8) and the grid (7) back to the
machine (Fig. 13).
Connect the device with the power grid putting the power plug to a socket. The espresso machine will turn on.
The signal will sound, the Power On/Off (A) button will be illuminated and the knob indicator (C) will flash 5
times. Then the knob indicator (C) will go out. The Power On/Off (A) button will stay illuminated all the time.
13.10. Press the Power On/Off (A) button. The signal will sound.
13.11. The knob indicator (C) will start flashing to inform you that the espresso machine is in the course of warming up.
m
13.12. When the knob indicator (C) stops flashing, the signal will sound. Continuous glowing of the knob indicator (C)
eans that the machine is ready for use (it has attained appropriate temperature).
13.13. Press and hold the Power On/Off (A) button and (L) button together. The knob indicator (C) will go out
and the signal will sound. The process of descaling will start. The descaling indicator will flash for the time
of this process.
13.14. The h t solution will come out of the brew head (4). o
st
ater.
in such a way that clea
13.18. The single signal will sound and the knob indicator (C) will go out. Water will come out of the brew head (4)
(the process of the machine rinsing will start).
13.19. After the process completion water will stop flowing through the brew head (4). Single sound signal and
flashing of the machine indicator (C) will indicate this. The machine will automatically turn off.
13.20. The Power On/Off
13.15. Wait until the solution flow through the brew head (4). The ending of 1 stage of descaling is indicated by
repeating sound signal and flashing of the knob indicator (C).
13.16. Take off and rinse the tank (1) with clean w
13.16. Put the empty container under the brew head (4)
n water could flow through it.
13.17. In order to conduct 2
nd
stage of descaling (cleaning), fill the tank (1) with clean water to the MAX mark on the
water tank (1). Close the cover of the water tank (1) and then put the tank back into the espresso machine.
(A) button will be illuminated.
13.21. Turn the machine off at the power outlet and unplug the power cord.
13.22. Wait until the device will cool off completely.
13.23. Take off the water tank (1) and the drip tray (8) with the grid (7) from the espresso machine (Fig. 11).
13.24. Set the espresso machine upside down and put the filter grid again on the filter head (4) screwing the grid with
the use of an appropriate screwdriver (Fig.14).
13.25. Set the espresso machine ba s work position and put the drip tray (8) with the grid (7) and the water
tank (1) back in the machine (Fig.13).
ck on it
ATTENTION! During the process of descaling all functions of the machine are inactive.
Fig. 11 Fig. 12
Fig. 13 Fig. 14
96