Hyundai H-CMMD4042 - Инструкция (Страница 49)

Sub phase: if trying to boost the bass output of subwoofer the bass gets more murky. This may indicate that the
subwoofer’s output and bass content you hear from other speakers cancel each other out. To remove this
problem change the setting of subwoofer: 0D (subwoofer output in phase), 180D (subwoofer output ol^ phase).
Bass Q-factor: when the Bass center is selected and adjusting the Q-factor alters the sharpness of the Bass
output, the larger the Q-factor, the sharper the bass. Select the Bass Q-factor: 1.0, 1.25, 1.5, 2.0.
RDS setup
RD
5
$ETUP
RDS I On
CT I Pit
Region j at
1.
2.
3.
4.
RDS: set the RDS function: ON,
5.
OFF.
Enter the RDS SETUP menu.
Use the
A / T buttons on the panel or ►►/!!► buttons on the RC or t
touch the desired item on the screen to select the desired setting: RDS,
CT, Region.
Press the ◄/► buttons on the panel or buttons on the RC or
touch the desired button on the screen to enter the list of values.
Press the
A / T buttons on the panel or ►►/!!► buttons on the RC or
touch the desired button on the screen to select the desired value.
Press PLAY/PAUSE / ENTER / SCAN button to confirm.
CT: set the clock adjusting method: ON (clock is adjusted by RDS automatically), OFF (Clock cannot be
adjusted by RDS).
Region: set the Region function: ON (automatically switch to RDS station with same PI), OFF (automatically
switch to the station with strong signal).
Screen CAL
Use the CAL screen when the touch screen is not sensitive or valid. Calibrate it following the clew displayed on
the screen after entering the SCREEN CAL mode.
49