Image setting, Parking cable function, Monitor movement mechanism – Инструкция по эксплуатации Hyundai H-CMMD4042
Страница 21
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
![background image](/manuals/729551/21/background.png)
• OR press the WIDE/PIC button on the monitor or the WIDE button on the RC repeatedly to select the
aspect ratio: CINEMA => NORMAL => STANDBY.
Image setting
1. Press the PIC button on the RC or press and hold for 2 seconds the WIDE/PIC button on the monitor to
enter the picture quality setting menu.
2.
Press the
button on the RC or the A/T button on the panel to select the setting: COLOR,
CONTRAST, BRIGHT.
3.
Press the ^/^ button on the RC or the ◄/► button on the panel to adjust the setting.
4.
Press the PIC button on the RC or the WIDE/PIC button on the monitor to save changes.
Parking cable function
If the PRK SW cable is connected to hand brake switch, the video view to the TFT
monitor will be switched between Normal display and Caution display. Parking cable
function is ceases if Parking is OFF. Please refer to PARKING
When Parking is ON the monitor will show the special screen to prevent the driver
watching other content during driving. The passengers at the rear can watch
normally.
ATTENTION
DO NOT USETHISFUNCTION
WHILE DRIVING!
Monitor movement mechanism
When any path blocking or obstruction for the movement of the
monitor occurs, the following protection executes to prevent any
damage to the loader or the monitor. After the protection executed
normal operating resumed after the following action of the monitor
performed by pressing the OPEN/CLOSE button or repowering the
21
Obstruction /
Blocking
Situation
Seif
protection
of this unit
After OPEN
key is
pressed
Disconnect &
reconnect
the power
Monitor
loading out
horizontally
Auto loading
back in to the
mechanism
Fully
extended
horizonta lly
Auto loading
back in to the
mechanism
Monitor
loading in
horizontally
Stop at the
obstruction
point
Fully
extended
horizontally
Loading back
in to the unit
Monitor
loading out
vertica lly
stop at the
obstruction
point
Swiveling
back to
the unit
Swiveling
back to
the unit
Monitor
loading
in vertically
stop at the
obstruction
point
Swiveling
back to
the unit
Swiveling
back to
the unit