Beko OIE 25500 X - Инструкция (Страница 27)

m Front door inner glass is coated
to easy clean material. Do not
use any harsh abrasive
cleaners, hard metal scrapers,
scouring pads or bleach to
clean front door inner glass as
they may scratch the surface.
This may destroy the coating
material.
Removal of oven door
1. Open the front door.
2. Open the clips at the hinge housing
on the right and left hand sides of
the front door by pressing them
down as illustrated in the figure.
1 Front door
2 Hinge
3 Oven
4. Remove the front door by pulling it
upwards to release it from the right
and left hinges.
m Steps carried out during
removing process should be
performed in reverse order (steps
4, 3, 2 and 1) to reattach the
door. Do not forget to close the
clips at the hinge housing when
reinstalling the door.
Replacing the oven lamp
A Hot surfaces may cause burns!
Make sure that the appliance is
switched off and cooled down in
order to avoid the risk of an
electrical shock.
The oven lamp is a special heat-
resisting (T 300 °C) electric light bulb;
see Technical specifications, page 5.
Oven lamps can be obtained from a
good local electrical store.
m Position of lamp may vary from
diagram.
1. Switch off the appliance at the
mains.
2. Unscrew glass cover by turning
anti-clockwise.
3. Move the front door to half-way.
3. Unscrew oven lamp by turning anti­
clockwise and replace it with new
one.
4. Refit the glass cover.
27 I EN