Sony DCR-TRV6E - Инструкция (Страница 122)

122
Changing the MENU settings
Icon/item
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
EDIT SET
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV
or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on the
TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
In more than five minutes after removing the power source
The “AUDIO MIX”, “COMMANDER”, “HiFi SOUND”, and “WHT BAL” items are returned to their
factory settings.
The other menu items are held in memory even when the battery is removed.
POWER
switch
VCR/
PLAYER
CAMERA
MEMORY
VCR/
PLAYER
CAMERA
MEMORY
Mode
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
Meaning
To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The clock
changes by the time difference you set here. If you
set the time difference to 0, the clock returns to the
originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs on
your camcorder.
To output the beep instead of the melody.
To cancel the melody and beep sound.
To activate the Remote Commander supplied with
your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR’s
remote control.
To show the display on the LCD screen and in the
viewfinder.
To show the display on the TV screen, LCD screen
and in the viewfinder.
To light up the camera recording lamp at the front
of your camcorder.
To turn the camera recording lamp off so that the
person is not aware of the recording.
To make programmes and perform video editing
(p. 93).
To adjust and set the synchronicity of your
camcorder and a VCR for dubbing in edit set mode.
CAMERA
MEMORY
VCR/
PLAYER
CAMERA
MEMORY
CAMERA
MEMORY
VCR/
PLAYER
VCR/
PLAYER