Samsung PS63B680T6W - Инструкция (Страница 55)

English - 55
Setting Up Anynet +
Anynet + (HDMI-CEC) Setup
Press the TOOLS button to display Tools menu.
You can also display Anynet+ menu by selecting Tools → Anynet + (HDMI-CEC).
T
Anynet + (HDMI-CEC) → Off / On
To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
Auto Turn Off → No / Yes
Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set
Auto Turn Off to Yes, connected external devices are also turned off
when the TV is turned off. If an external device is still recording, it may or may not
turn off.
❑

N

N
N
Switching between Anynet + Devices
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet+ devices connected to the TV are listed. If you cannot find a device you
want, press the red button to scan for devices.
Only when you set
Anynet + (HDMI-CEC) to On in the Setup menu, the Device List
menu appears.
3. Press the ▲ or ▼ button to select to a particular device and press the ENTERE
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet + device by using the TOOLS button.
Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet + Menu Description
View TV Anynet + mode changes to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu
of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support the
recording function.)
(*recorder) Reserve Recording Enables reserving a recording for the recorder. (This is only available for devices that support the
recording reservation function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
N
N
N
N
N
❑
Continued...
Application
Media Play (USB & DLNA)
Anynet+ (HDMI-CEC) ►
Content Library
Home Network Centre
U Move E Enter R Return
Anynet+(HDMI-CEC) : On ▶
Auto Turn Off : Yes
U Move E Enter R Return
View TV
Device List
Recording
: DVDR
DVDR MENU
DVDR INFO
Receiver
: On
Setup
BN68-02113E-Eng.indb 55 2009-04-09 오후 3:54:39