Samsung PS63B680T6W - Инструкция (Страница 28)

English - 8
Supported Program
Product Guide
The Product Guide gives you information on the most important features of this TV.
For more detailed information, select the desired item.
Picture Quality : 1080 Full HD Motion, Ultra FilterBright, 100Hz Motion Plus, Cinema Smooth, Picture Mode
Medi
ⓐ.0 : Content Library Flash, USB2.0 Movie, DLNA Wireless
Eco-Friendly : Energy Saving, Eco-Material
Self Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still
exists.
Does the problem still exist with this test photo? appears on the screen.
If the test pattern does not appear or there is noise in the test pattern, select Yes.
If the test pattern is properly displayed, select No.
Yes : There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
No : There may be a problem with your external equipment. Please check your connections. If the problem still persists,
refer to the external device’s user manual.
Sound Test
If you think you have a sound problem, please perform the sound test.
You can check the sound by playing a built-in melody sound through the TV.
Does the problem still exist with this sound test? appears on the screen.
If during the sound test you can hear sound only from one speaker or not at all, select Yes.If you can hear sound from the
speakers, select No.
Yes : There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
No : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer
to the external device’s user manual.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker
in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the M MUTE button.
If headphones are connected, the test melody will play through the headphones.
Signal Strength (Digital channels only)
You can adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
Software Upgrade
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of
the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the
option to install the upgrade.
By USB
Insert a USB drive containing the firmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive
while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please
❑
N
•
•
•
❑

N
•
•

N
•
•
N
N
N

N
❑

Support / Input
BN68-02113E-Eng.indb 28 2009-04-09 오후 3:54:04