Samsung 2032MW - Инструкция (Страница 23)

English - 
Picture parameters are replaced with the factory default values.
This function is available in PC or DVI mode.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the EntEr
button.
2. Press the ▲ or ▼ button to select “Reset” then press the EntEr
button.
3. Press the ▲ or ▼ button to select “Image Reset” or “Colour Reset”.
Press the EntEr button.
4. Press the ◄ or ► button to select “OK” or “Cancel".
Press the EntEr button.
5. Press the EXIt button to exit.
 Image reset: You can replace all image settings with the
factory default values.
 Colour reset: You can replace all colour settings with the
factory default values.
➣
reset
You can select the black level on the screen to adjust the screen depth.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
EntEr button.
2. Press the ▲ or ▼ button to select “HDMI Black Level” then press the
EntEr button.
3. Press the ▲ or ▼ button to select “Normal” or “Low”.
Press the EntEr button.
 normal: The screen gets brighter.
 low: The screen gets darker.
This function is active only when the external input connects to HDMI (RGB signals). "HDMI Black
Level" function may not be compatible with or external devices.
4. Press the EXIt button to exit.
➣
Setting the hDmI Black level
normal
low
move Enter return
hDmI Black level
Image Reset ►
Colour Reset ►
move Enter return
reset
oK
move Enter return
Cancel
Image reset
For more information on the operating procedures, refer to the CD manual. ➣
BN68-01477A-X1Eng-0109indd.indd 21 2008-01-09 ¿ААь 8:34:39