Registering magic remote control, How to use magic remote control – Инструкция по эксплуатации LG 50PH670V
Страница 46
24
ENGLISH
MAGIC REMOTE CONTROL FUNCTIONS
Precautions to Take when
Using the Magic Remote
Control
y
Use the remote control within the
maximum communication distance (10
m). Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
y
A communication failure may occur due
to nearby devices. Electrical devices such
as a microwave oven or wireless LAN
product may cause interference, as these
use the same bandwidth (2.4 GHz) as the
Magic Remote Control.
y
The Magic Remote Control may be
damaged or may malfunction if it is
dropped or receives a heavy impact.
y
Take care not to bump into nearby
furniture or other people when using the
Magic Remote Control.
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility
of electric wave interference.
y
It is recommended that an Access Point
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than
1 m, the Magic Remote Control may not
perform as expected due to frequency
interference.
Registering Magic Remote
Control
It is necessary to ‘pair’ (register) the magic
remote control to your TV before it will work.
How to register the Magic Remote Control
BACK
HOME
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2 If registration fails, turn the
TV off and back on, then
press the
Wheel(OK) button
to complete registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the
BACK
and
SMART buttons together
for 5 seconds to reset, then
register it by following “How
to register the Magic Remote
Control” above.
2 To re-register the Magic Remote
Control, press and hold the
BACK button for 5 seconds
toward the TV. When registration
is completed, the completion
message appears on the screen.
How to use Magic Remote
Control
1 If the pointer disappears,
move the remote control
slightly to left or right. Then,
it will automatically appear
on the screen.
»
If the pointer has not been
used for a certain period
of time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver
of the remote control at your
TV then move it left, right, up
or down.
»
If the pointer does not
work properly, leave the
remote control for 10
seconds then use it again.
1
If you press
Wheel(OK) on the Magic
Remote Control, the following screen
appears.
Shows information about the current
programme and screen.
2
You can select My Apps Menu.