Diagnostic lights – Инструкция по эксплуатации Dell OptiPlex 170L

Страница 20

Advertising
background image

20

Quick Reference Guide

www

.dell.com | support.dell.com

Diagnostic Lights

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions

located in the Product Information Guide.

To help you troubleshoot a problem, your computer has four lights labeled "A," "B," "C," and "D" on
the back panel. The lights can be yellow or green. When the computer starts normally, the patterns
or codes on the lights change as the boot process completes. If the POST portion of system boot
completes successfully, all four lights display solid green. If the computer malfunctions during the
POST process, the pattern displayed on the lights may help identify where in the process the
computer halted.

Blinking yellow

A power supply or system board
failure has occurred.

Check "Diagnostic Lights" on page 20 to see
if the specific problem is identified. See
"Power Problems" in your online

User’s

Guide.

Solid green and a
beep code during
POST

A problem was detected while the
BIOS was executing.

See "Beep Codes" on page 22 for instructions
on diagnosing the beep code. Also, check
"Diagnostic Lights" on page 20 to see if the
specific problem is identified.

Solid green power
light, no beep code
and no video during
POST

The monitor or the graphics card may
be faulty or incorrectly installed.

Check "Diagnostic Lights" on page 20 to see
if the specific problem is identified.

Solid green power
light and no beep
code but the
computer locks up
during POST

An integrated system board device
may be faulty.

Check "Diagnostic Lights" on page 20 to see
if the specific problem is identified. If the
problem is not identified, contact Dell for
technical assistance.

Power Light

Problem Description

Suggested Resolution

Light
Pattern

Problem Description

Suggested Resolution

off
off
off
off

The computer is in a normal off
condition or a possible pre-BIOS
failure has occurred.

• Verify that the computer is plugged into a working

electrical outlet and that you have pressed the power
button.

Advertising