Phone configuration (sip)- настройка sip телефона – Инструкция по эксплуатации Planet Technology VIP-153T

Страница 27

Advertising
background image

PLANET VoIP Телефоны серии VIP-103PT/153PT/153T/153M. Инструкция по эксплуатации

27

4. Phone Configuration (SIP)-

Настройка SIP телефона

В меню настроек, расположенном в левой части экрана выберите “ Phone configuration ”. Откроется
окно как показано на скриншоте:

IP PBX Setting:

IP PBX Setting:

включить/выключить поддержку автоматической настройки на IP АТС.


Prefix Setting:

Этот параметр предназначен для ввода префиксов при звонках на ТФОП линии и при выполнении
вызовов через некоторые IP АТС. Обычно он не используется, так как обработка первых цифр
набираемого номера (префикс) и маршрутизация вызова в зависимости от первых цифр номера с
подстановкой или удалением цифр реализована на самих IP АТС или шлюзах.

For some specific VoIP system, the IP Phone can call to PSTN/mobile number and the called number must include the country code, e.g. the
country code of Taiwan is 886, so if want to call a Taipei city call 02-12345678, the called number needed to be 886-2-12345678. But this is
not consistent with the normal dialing behavior. In order to use the normal dialing behavior, you can set the “My Country Code” value to 886,
and set the “Area Prefix Code” value to 0.
As for the “International Code”, when you want to dial an international call, the International Code will be removed. E.g., suppose want to
make a call to China, the dialed number will be 002-86-2112341234, the IP Phone will remove the “International Code” 002, and send the
real number of 86-2112341234.
This prefix code implementation is only needed for some specific VoIP system. Normally, this is not needed; just let all the prefix values be
empty.

Advertising