Olympus DS-10 - Инструкция (Страница 7)

7
VCVA
1
2
3
4 5 6 7
1 Battery indicator
2 VCVA(Variable Control Voice
Actuator) indicator
3 Character Information display
4 Alarm indicator
5 Erase lock indicator
6 Current file number
7 Total number of recorded files in
the folder
Display (LCD Panel)
Hold
HOLD
Setting the HOLD switch to the HOLD
position.
If you set the recorder to HOLD status by sliding
the HOLD switch in the direction of the arrow,
the current conditions will be preserved, and all
buttons and switches except the HOLD switch
will be disabled. This feature is useful when the
recorder has to be carried in a bag or pocket.
Remember to reset the HOLD switch when
using the recorder.
Notes
• If you set the recorder to hold during Stop mode, the
display goes dark. If you press any button, the time will
flash for about 2 seconds, but the function of the button
is disabled.
• The alarm will sound at the scheduled time even if the
recorder is set to hold. The recorder begins to play the
file associated with the alarm when you press any button.
• If you are recording when you switch the recorder to
HOLD, recording will continue until the recorder memory
runs out.
Identification of Parts / Hold