Olympus DS-10 - Инструкция (Страница 17)

17
Alarm Playback
Function (ALARM)
The alarm playback function can be set to
play a selected file at a pre-set time.
1 Press the FOLDER/REPEAT button
to choose a folder.
2 Press the FF/+ or REW/– button
to choose the file to be played
when the alarm sounds.
3 Press the MENU button.
The menu opens (
☞ P.25).
4 Press the FF/+ or REW/– button
until “ALARM” flashes on the
display.
5 Press the PLAY/SET button.
The alarm playback setup process begins.
6 Press the FF/+ or REW/– button
to choose between ON and OFF.
ON : Enables alarm playback.
OFF : Disables alarm playback.
7 Press the PLAY/SET button to
complete the setup screen.
When you choose ON, the hour indicator
flashes.
When you choose OFF, the alarm indicator
disappears and finishes with Step 12.
8 Press the FF/+ or REW/– button
to set the hour.
9 Press the PLAY/SET button to
accept the hour.
The minute indicator flashes.
10 Press the FF/+ or REW/– button
to set the minute.
11 Press the PLAY/SET button to
accept the minute.
12 Press the STOP button to close
the menu.
An alarm tone will sound at the scheduled
time. Press any button while the alarm
sounds to play the file you associated with
the alarm.
Notes
• The alarm playback function can be set for only one file
at a time.
• The alarm will sound at the scheduled time every day
unless the alarm playback setting is cleared.
• If you wish to change the file for alarm play, first turn the
alarm settings “OFF”, then make any desired new alarm
settings.
• The alarm will sound for 5 minutes and then stop.
• If you are using the recorder at the scheduled time, the
alarm will sound after you’re done.
• The alarm will sound at the scheduled time even if the
recorder is set to hold. The recorder begins to play the
file associated with the alarm when you press any button.
• The alarm playback setting is cleared if the selected file
is erased.
Alarm Playback Function (ALARM)