Olympus DS-10 - Инструкция (Страница 11)

11
Using the Variable
Control Voice
Actuator (VCVA)
When the microphone senses that sounds
have reached a preset volume, the built-in
Variable Control Voice Actuator (VCVA) starts
recording automatically, and stops when the
volume drops.
Particularly helpful for extended recording, the
VCVA not only conserves memory by turning
off recording during silent periods, but also
makes playback more efficient and convenient.
1 Press the MENU button.
The menu opens (
☞ P.25).
2 Press the FF/+ or REW/– button
until “VCVA” flashes on the display.
3 Press the PLAY/SET button.
The VCVA setup process begins.
4 Press the FF/+ or REW/– button
to choose between ON and OFF.
ON : Will start recording in VCVA mode.
OFF: Will resume recording in normal mode.
5 Press the PLAY/SET button to
complete the setup screen.
6 Press the STOP button to close the
menu.
When ON is selected, a indication
will be displayed on the screen.
7 Press the REC button to start
recording.
When the sound volume is lower than the
preset pause sound level, recording
automatically pauses after approximately
1 second, and “STANDBY” flashes on the
display. The record/play indicator lamp
glows when recording starts and flashes
when recording pauses.
Adjust the start/stop
actuation level
Press the FF/+ or REW/– button to
adjust the pause sound level during
recording.
The pause sound level can be set to any of
15 different values. The higher the value, the
higher the sound sensitivity. At the highest
setting, even a small sound will activate
recording.
The VCVA pause sound level can be adjusted
according to the ambient (background) noise.
Notes
• The start/stop actuation level also varies depending on
the selected microphone sensitivity mode ( ☞ P.12).
• To ensure successful recordings, prior testing and
adjustment of the start/stop actuation level is
recommended.
Using the V
ariable Control V
oice Actuator
(VCV
A)