Olympus DS-10 - Инструкция (Страница 15)

15
Noise Cancel
Function
If recorded sound is difficult to hear because of
noisy surroundings, adjust the Noise Cancel
setting level. Noise will be reduced in the file
when it's played back for clearer sound quality.
1 Press the MENU button while the
file is playing.
Displays currently set Noise Cancel level.
2 Press the MENU button again to
choose a noise cancel level.
Each time you press the MENU button, the
display changes as follows.
OFF : (Initial Setting)
Low : Reduces noise.
High : Reduces more noise.
If the display is already set to Noise Cancel,
start from step 2.
Change the Noise Cancel level within 8
seconds, otherwise the level is set at the
displayed level and the display returns to its
original view.
Notes
• If you set it to “Low” or “High”, the display flashes the
Noise Cancel level for about 2 seconds when a file is
played back.
• If you set Noise Cancel to “Low” or “High”, the setting
remains valid until it's set to “OFF”.
• If you set Noise Cancel to “Low” or “High”, you cannot
use the Fast Playback and Slow Playback functions (
☞
P.13).
• As for WMA format files, only ones recorded with this
recorder can use the Noise Cancel function.
Erasing
Erasing One File at a Time
A selected file can be erased from a folder.
1 Press the FOLDER/REPEAT button
to choose a folder.
2 Press the FF/+ or REW/– button
to choose the file you want to
erase.
3 Press the ERASE button.
“FILE ERASE?” flashes on the display for
approximately 8 seconds.
4 Press the ERASE button once more
when “FILE ERASE?” is flashing.
The display changes to “FILE ERASE!” and
erasing will start.
“ERASE DONE” is displayed when the file is
erased. File numbers are incremented
automatically.
Notes
• If the ERASE button is not pressed within the 8 seconds
after “FILE ERASE?” starts flashing, the recorder will
revert to stop status.
• An erased file cannot be restored.
• Locked files cannot be erased (
☞ P.16).
Erasing
Noise Cancel Function