JVC KV-AVX900 - Инструкция (Страница 67)

SETTINGS
67
ENGLISH
Continued on the next page
Equalizer
Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3,
☞ [58]
Sound
Menu items Selectable settings, [reference page]
Fader/Balance Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only (F6)
• Downmost—rear only (R6)
When using a two-speaker system, set the fader to the center (0).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only (L6)
• Rightmost—right only (R6)
Volume Adjust Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12 to +12; Initial 00
• For Disc/SD/USB: An auto-adjustment level is commonly used when playing
DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files
Subwoofer Phase Select either <Normal> or <Reverse>, which reproduces a better sound.
Subwoofer Level * 18 Adjust the subwoofer output level. Level: –06 to +08; Initial 00
High Pass Filter Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.
Crossover Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
Amplifier Gain You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less
than 50 W)
High: VOL 00 to 50
Rear Speaker * 19 You can activate/deactivate the rear speakers.
Off, On
* 18 This subwoofer level setting takes effect only when surround is deactivated. ( ☞ also page 27)
* 19 This setting takes effect only when Dual Zone is activated. ( ☞ also page 30)
EN58-70_KW-AVX900EE_f.indd 67 EN58-70_KW-AVX900EE_f.indd 67 07.3.13 10:10:40 AM 07.3.13 10:10:40 AM