Problem, Causes what to do – Инструкция по эксплуатации Sharp SJ-GF60AT

Страница 53

Advertising
background image

53

Problem

Page

40

49

28

Fresh case
does not
close properly

Is the gripper (drawing on the right)

deformed?

Contact the Sharp Service

Center for parts

replacement. Grippers

(Status after removing fresh case)

Causes

What to do

It is the failure of heat release fan motor.

(It cannot be seen from outside.)

Though cooling operation will be continued, the cooling

performance may deteriorate.

Although operation is accepted from the control panel even

when this error is displayed, the error display will return when

it goes back to normal display.

All temperature
control lamps
are flashing
at the same time

41

28
45

A small hole at door inside

Hole required for a insulation material

foaming process (several on every door)

Lines looks like crack or blemish on plastic parts

The dent at plastic part

Dent made by

shrinkage of

the resin material.

Followings are not defects during production. You can use them normally.

The meeting part of the resin material or

the junction part of the metallic mold

are remained like lines.

(Status after removed fresh scase, etc.)

The shape (crack and dent) of parts is worried about.

Dent

Line

Small hole

Hot food freezing,
Express freezing,
or Express ice making
are not working

Are any of the functions;

Hot food freezing, Express freezing,

or Express ice making in operation?

Cancel or wait for the function

currently in operation to finish.
Those functions cannot work at the

same time.

Is the refrigerator door open?
Is water, oil, or something attached to

the control panel or your finger?

Close the door first to operate the panel.
Wipe it off before operating the panel.

Touch the keys with your bare hand.

Is some sticker or tape attached to the

control panel?

Remove the sticker or tape before

using the panel.

Are you operating the right place in the

control key?

Make sure to press the center of the

control key.
Press the panel a little bit longer.

Are you pressing the panel long enough for it to respond?

The touch control
panel does not
react to any
operation

Are food with strong smells stored

without wrapping or for a long period?

We recommend use of a plastic wrap.

It is impossible to remove all odors even by the deodorizing mode. The vegetable

compartment is not deodorized because the cool air does not enter the compartment directly.

Sometimes, you may smell ozone, which is generated from Plasmacluster.

The concentration of ozone is so small and will not harm human health.

Ozone will also decompose soon, and therefore, it will not fill the compartment.

The odor sources may be attached inside the refrigerator. Wipe the inside with

a wet cloth wrung tightly.

There is odor
in the
compartment

Is the refrigerator tilted or moved?

If water remains in the evaporating pan (which

cannot be seen from outside) inside the

refrigerator, it may become spilled on the floor.

The floor
is wet

<Others>

<Control panel>

Are you wearing gloves or a adhesive bandage?

Are you trying to operate the panel with nails

or something pointy?

Advertising
Эта инструкция подходит к следующим моделям: