Sharp SJ-GF60AT - Инструкция (Страница 42)

42
Automatic
ice making
WARNING
Process of ice making
Ice tray
Ice case
Water tank
Water supply
Releasing
Supply water from the water tank for ice
cube making.
Water
purification
filter
Capacity
Number of ice
cubes made
per 1 time
Types of
ice cubes
Approx. 1.2L
Approx. 8 pieces
(Number of ice cubes may differ)
Mixed with 2 types
Water supply
amount per
1 time
Approx. 100mL
(Approx. 230mL for large size)
• Do not put anything but water.
Do not use hot water (upper temperature
limit of 60 °C), juice or tea (which will be
the cause of dirt in the ice maker).
It may lead to ice making failure or
breakdown. • Do not place the shovel or food on
top of the ice cubes.
This may cause the automatic ice
maker to malfunction (damage of the
detection lever, etc.) or the case
to be unable to be pulled out.
• The amount of ice cubes stored is
checked with the detection lever.
Ice making is stopped at
full ice level and is resumed
when ice gets less.
Water to be used About full ice level detection
Detection lever
full ice level
Water
purification
filter
Place the
shovel here.
• The minerals contained in water may
solidify and whiten as water freezes.
Minerals turn into a state of which is
insoluble in water once it freezes, so
melting the ice cubes will leave only white
floating substance, but this is normal.
• This is more likely to happen when you
use hard water (e.g. water with the
hardness of 100mg/L or more).
• Use the shovel when taking ice cubes out or make
them even.
• Do not put the ice cubes directly into your mouth.
Ice has protrusions. The slits
placed in the ice tray was left as
the part of the ice, and this
makes the sharp shape by ice.
Pleaase pay attention to the
followings in order to prevent
injury;
• Replace the filter for every 3 to 4 years normally.
• Replace the filter also when it is broken or odor is felt
uneasy.
• Pass an order to the Sharp service center.
Part Code: DFIL-A012CBKZ
• The ice making performance does not change even if
the water purification filter is not existed.
White and floating substance in ice cubes Protrusions of ice cube
Ice tray
Protrusion
Slit
Ice
Do not touch the machinery parts
(upper section of the ice case) of
the automatic ice maker.
Cause of the injury / frostbite