Names and functions, Front panel – Инструкция по эксплуатации Marantz PM6003

Страница 9

Advertising
background image

4

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERA

TION

ADV

ANCED

CONNECTION

REMOTE CONTROLLER

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

ENGLISH

NAMES AND FUNCTIONS

FRONT PANEL

q POWER SWITCH

Pressing once switches the power ON, and pressing
again switches it OFF.
If the POWER switch is in the ON position, the
power of this unit can be turned ON/OFF by pressing
the POWER button on the remote controller.

w STANDBY INDICATOR

Lights up when the unit is in the standby mode.

e INPUT SELECTOR

Selects the program source to be recorded or
played from the PHONO, TUNER, CD, AUX/DVD,
RECORDER 1 (CD-R), and RECORDER 2 (MD/
TAPE).

r SOURCE DIRECT button and

indicator

This button turns SOURCE DIRECT mode ON and
OFF. When SOURCE DIRECT is ON, the center of
the button is lit. In the Source Direct mode, the
audio signals bypass the tone control circuit.

t FUNCTION INDICATORS

One of the indicators lights up to indicate the input
source selected with the INPUT SELECTOR.

y MUTE INDICATOR

Light up when the MUTE button in the remote
controller is pressed.

Note

Be sure to check the VOLUME control setting
before pressing this switch to cancel muting. If the
muting is canceled while the volume setting is high,
the speakers could be damaged.

u VOLUME CONTROL

Adjusts the volume level. Turn the knob clockwise
to increase the volume.

i REMOTE SENSOR

The remote sensor receives the infrared commands
from the remote controller. When an infrared signal
is received from the remote controller. The remote
controller must always be pointed directly at the
remote sensor.

o BALANCE CONTROL

Turn the knob to correct an unbalanced program
source such as stereo broadcast or to vary the
output level of the left or right channel. Note that, if
the BALANCE control is turned fully in one direction,
the sound will not be heard from the speaker on the
other side.

!0 LOUDNESS button and indicator

This button turns LOUDNESS ON and OFF. When
LOUDNESS is ON, the center of the button is lit.
The LOUDNESS compensates for human hearing
characteristics by boosting the bass and treble
response at low volume levels to achieve a more
pleasing tonal balance.

!1 SPEAKERS A/B buttons and

indicators

These buttons turn the speaker output to the
speakers connected to the SPEAKER SYSTEMS
A/B terminals on the rear panel ON and OFF. When
speaker output is ON, the center of the button is
lit. To listen with headphones, turn speaker output
OFF.

!2 BASS AND TREBLE TONE

CONTROLS

Adjusts the tone by controlling the levels of two
frequency bands. Turn each control toward (+) to
enhance the corresponding frequency band, or
toward (–) to attenuate it.
TREBLE: Adjusts the high frequency level.
BASS:

Adjusts the low frequency level.

!3 PHONES JACK

Insert the standard phone plug of the headphones
into this jack.

PM6003_N_01_Eng_New.indd 4

PM6003_N_01_Eng_New.indd 4

09.4.20 3:57:53 PM

09.4.20 3:57:53 PM

Advertising