In models with removal of the knobs – Инструкция по эксплуатации Beko CG 61110 G
Страница 41
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
In models with Removal of the knobs
1.
Ignite the burner that should be adjusted, turn
the knob to the reduced position, pull and fake
the knob off.
2.
With a screwdriver, make the tap reduced
flow adjustment from the injector that is on the
gas tap (only the head is visible with the bolt
shape).
If is sufficient to tight to screw
completely, in butane/propane gas.
For the natural gas, you should turn the screw
counter-clockwise
once. The normal length of a straight flame
in the reduced position should be 6 - 7mm.
If the flame is higher than the desired position,
turn the screw clockwise. If its smaller to the
opposite.
For the last control of the burning of the cooker,
bring the cooker high-flame and reduced positions
and check whether the flame is on or off.
17