Pari 4: operaiing ihe iop burners – Инструкция по эксплуатации Beko CG 61110 G

Страница 30

Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".

Advertising
background image

Pari 4: Operaiing ihe iop burners

To obtain

maximum

efficiency

A

correct use to

burner results in gas
saving and better
output Therefore
we recommend to

use saucepans

whose base
complet^ cover the

flames. Four

saucepans with
much smaller
diameters to be put
auxiliary burner, use

the pan support

adaptor.

22 cm

25 cm

If your coober has flamo
failure devise on gas burners/

In case of any flame failures with any

reasons in the top burners, the flame

failure device immediately cuts of the

gas flow. It is also a safety device for

the wrong use of the children.
You should turn the knob to the

clockwise direction by pressing. You should ignite by

pressing the knob and wait for its ignition. You should

keep the knob at pressed position for 3-5 seconds
after you see the flame around the burner. Repeat the
sequence of operations if the fíame does not continues.

ó

Use of top gas burners

Turn the relevant knob by slightly pressing in

counter clockwise direction.

The large flame on the knob corresponds to

maximum capacity position and the small

fíame corresponds to minimum capacity

position.

fj^nifion by buffon

(In models with ignition)

tt provides automatic ignition.

When the button is pressed and released all plugs

spark at the same time. The ignition starts at the burner

through which the gas flows. If an ignition does not

occur, repeat the same action. Holding the button at

pressée/

position does not provide ignition.

In mocieis wifb Ignition from fbe
irnob

You should turn the knob to clockwise direction

by pressing. The spadi occurs itself immediately
on the burners till you fake your hand off the
knobs.

After you release the knob, if the ignition does

not continue repeat the same process by keeping
the knob pressed for 15 seconds. If still no igniton
occurs,

wait

for

I minute

and

repeat

again.

Warning : Do not keep the htob in

pressée/ position

more than 15 seconds.

Advertising