Инструкция по эксплуатации Beko CE 66200
Страница 42
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
Please note
* The timer controls the oven heating element only and the current time
of day must be set before the oven will function.
* If the timer has been set to an automatic or semi automatic programme,
the daily time cannot be readjusted, the semi or auto programme, must
be cancelled. See “How to cancel automatic programme”.
How to set the current time of day
The clock display uses a 24 hour configuration 8:30 pm = 20:30
* Press and hold “
a"
s” buttons at the same time.
* Press “+” button to increase or to decrease the time.
* Adjust using the “+” or buttons to set the current time. If “Auto”
flashes. See “How to cancel automatic programme”.
* Release the buttons, the clock will now start.
Manual cooking (or to cancel a programme)
* Presso button, press the button, until ” 0:00 “ is displayed.
* Press the viIV button.
The
“AUTO”
and S sign will disappear.
* Set the oven knob to the required cooking temperature and function
selection knob to the desired position.
* The oven will switch on. The Amber oven indicator will light.
* At the end of cooking, switch off by resetting the oven thermostat knob
to the
(off)
mark.
Note:
The timer will not switch off the oven. To switch off the oven turn the
oven thermostat and selection knob to the
“1“ (off)
mark.
oooooo
—
+
Some models, there is only one knob to adjust the stage of
cooking. Make your adjustments by using this knob.
Semi-automatic programming
This mode allows a manual start time but an automatic switch off time,
which is very useful to prevent the over cooking of food.
* Press S button. Press the “+” (or “-”) buttons, to set the cooking
time duration
("AUTO”
and S will be displayed) in minutes.
* Set the oven thermostat knob to the required temperature and function
selection knob to the desired position.
* The oven will switch on and cooking will commence.
* The programmer will switch the oven off at the end of the preset
cooking time. “Auto” will flash and the timer alarm will bleep. To turn off
the alarm press the “S” button.
* Set the oven thermostat knob to the (off) mark.
* Press button to cancel
’’AUTO”.
13