Attatching to a wail, 2 screw a screw (not included) into the wall, Remove the stand – Инструкция по эксплуатации Panasonic SC-DT310

Страница 47: Fitting speaker stands (optional), Preparation, Keeping the cables out of the way, Notes on speaker use, Other speaker setup options

Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".

Advertising
background image

t

0)

<n

■S

I

Other speaker setup options

Attatching to a wail

(Center and surround speakers only)

The wall or pillar on which the speakers are to be attached should

be capable of supporting 5 kg per screw.

2

Screw a screw (not included) into the

wall.

1

Remove the stand.

BEFORE REMOVING THE STAND
•Take the speaker cable out of the stand’s hole if it is

threaded through.

• Lay the speaker on a soft cloth.

Unscrew the screw with a Phillips-head screwdriver.

3

Fit the speaker securely onto the

screw with the hole.

Fitting speaker stands (optional)

Preparation
Remove the stand (• step 1 above).
Ensure the stands meet these conditions before purchasing them.
• Observe the diameter and length of the screws and the distance

between screws as shown in the diagram.

•The stands must be able to support over 5 kg.
•The stands must be stable even if the speakers are in a high posi­

tion.

5 mm
pitch 0.8 mm

7 to 10 mm

Keeping the cables out of the way

Pass the cables through the holes in the stand to keep them out of the way.

Notes on speaker use

•You can damage your speakers and shorten their useful life if you

play sound at high levels over extended periods.

• Reduce the volume in the following cases to avoid damage.

-When playing distorted sound.

-When the speakers are receiving howling from a record player,

noise from FM broadcasts, or continuous signals from an oscil­
lator, test disc, or electronic instrument.

-When adjusting the sound quality.
-When turning the unit on or off.

If irregular coloring occurs on your television

These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and setup
combinations.

If this occurs, turn the television off for about 30 minutes.
The television's demagnetizing function should correct the
problem. If it persists, move the speakers further away from the tele­
vision.

Caution

• Use the speakers only with the recommended system.

Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has oc­

curred or if you experience a sudden change in per­
formance.

• Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

RQT6924

Advertising
Эта инструкция подходит к следующим моделям: